The SeaSucker 3-Rod Holder with one 114 mm Vacuum Mount
This is SeaSucker’s entry-level boat rod holder; its primary purpose is rod transportation. Capable of transporting three light to medium rods / reels with ease; just mount it on a reasonably smooth surface. Attach the boat rod holder where you need it; then if you need to move it elsewhere it can be removed in seconds!
There is plenty of surface area compatible with our Vacuum Mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum pad tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum pad and you're done.
This product includes one 114 mm Vacuum Mount pre-installed onto the 406 mm aluminium track using marine grade stainless steel hardware. Three white PVC rod holders slide onto a 406 mm anodized aluminium track. The track has three sets of pre-drilled and countersunk holes. The rod holder's position on the track is fully adjustable; move them by squeezing the rod holder's locking clamp.
If you wish to upgrade this rod holder to transport heavier gear please add another 114 mm SeaSucker Vacuum Mount to your order. We will install both vacuum mounts in the correct location prior to shipping.
Boat rod holder internal dimensions: 304 mm x 44 mm; they are pinned at the bottom for slotted rod butts.
Product Features & Benefits
- You will save on the cost of having to fill in holes ever time, this can get very expensive!
- You will save money by not having to buy the same equipment for your next boat.
- The cost of maintaining our vacuum mounts is very low; every part is replaceable and the pump is serviceable.
- The one solution for many surfaces including steel, aluminium, glass, fibreglass and some non-skid surfaces.
- If you change your mind you can relocate the boat rod holder in seconds and leave no marks behind.
- This boat rod holder is upgrade-able; if you need to carry heavier rods or do some trolling, just add another Vacuum Mount.
- It's the only boat rod holder on the market that can be used in almost any boat.
- If you are going out in your friends boat and he is short on rod storage just take this boat rod holder with you.
WHAT'S IN THE BOX?
- SeaSucker 3-Rod Holder with one 114 mm Vacuum Mount Kit includes
- 3 x Track Rod Holders
- 1 x 406 mm Aluminium Track
- 1 x 114 mm SeaSucker White Vacuum Mount (pre-installed)
- 1 x 114 mm SeaSucker White Protective Cover
- SeaSucker Vacuum Mount User Guide
- Some basic assembly; no tools required
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||45 kg|
|Load Carrying Capacity:||18.14 kg|
|Vacuum Mount Diameter:||114 mm|
|Vacuum Mount Height when mounted:||45 mm|
|Vacuum Mount Height at rest:||52 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
|Rod Holder Internal Diameter:||44 mm|
|Rod Holder Internal Depth:||304 mm|
|Aluminium Track Length:||406 mm
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!