SeaSucker

Binoculars Pocket

Add to Compare

SKU:: 5448
Condition:: New
Availability:: IN STOCK - Same business day shipping if order is placed before 3pm
Shipping:: Calculated at Checkout

Description
Warranty Information

SeaSucker Binoculars Pocket

The SeaSucker Binoculars Pocket will attach to virtually any vertical surface on your boat or car or caravan etc.. The SeaSucker Binoculars Pocket is made from soft plastic and will hold binoculars but is also great for general storage. It has drain holes at the bottom keep it from filling with water. The SeaSucker Binoculars Pocket is a truly removable boat storage solution and is super quick to install and remove. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 114 mm Vacuum Mount. There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats.

A few pumps on the vacuum mount pump is all it takes to install the Binoculars Pocket. Lift the Vacuum Cup tab and it pops off. To protect the Vacuum Mount when not in use press the included protective cover over the vacuum cup and you're done.

Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!

Product Features & Benefits

You will save on the cost of having to fill in holes ever time, this can get very expensive!
The cost of maintaining our vacuum mounts is very low; every part is replaceable and the pump is fully serviceable.
The one solution for many surfaces including steel, aluminium, glass, fibreglass and some non-skid surfaces.
If you change your mind you can relocate the Binoculars Pocket in seconds and leave no marks behind.
It's the only Binoculars Pocket on the market that can be easily used in almost any boat.

WHAT'S IN THE BOX?

SeaSucker Binoculars Pocket
1 x 114 mm SeaSucker White Vacuum Mount (pre-installed)
1 x 114 mm SeaSucker White Protective Cover
This kit arrives pre-assembled

Specifications

Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.

**114 mm Vacuum Mount Specifications**
Maximum Pull Rating:	45 kg
Load Carrying Capacity:	18.14 kg
Vacuum Mount Diameter:	114 mm
Vacuum Mount Height when mounted:	45 mm
Vacuum Mount Height at rest:	52 mm
Housing Top Diameter:	60 mm
Housing Height Only:	33 mm
Housing Top Slot Width:	7 mm
Housing Top Slot Length:	14 mm
Housing Centre Thread:	¼-20

**Binoculars Pocket Specifications**
Overall Length:	228 mm
Overall Width:	70 mm
Overall Height:	203 mm

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.