This Bait Board is the same as the SeaSucker Large Bait Board Horizontal Mount with one key difference. Instead of attaching the SeaSucker Vacuum Mount on the top of your gunwale, this table has an "L" bracket. This allows you to mount the included 114 mm SeaSucker Vacuum Mount to the inside gunwale wall in a vertical position. The Bait Board then sits on the horizontal surface; with a working surface of 559 mm wide by 305 mm deep.
This Large Bait Board / Table has room for: filleting; bait preparation; or even serving up the catch of the day. Made of 13 mm white starboard, this table is a solid piece of kit and can dispose of baits overboard with ease.
You can mount this table directly to the side of your gunwales, bait tank or any other vertical surface. Open corners let you easily dispose of unwanted baits overboard and knife slots provide convenient and safe knife storage. If you need to mount a Bait Board on a horizontal surface please check the SeaSucker Large Bait Board Horizontal Mount.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||90 kg|
|Load Carrying Capacity:||31.75 kg|
|Vacuum Mount Diameter:||152 mm|
|Vacuum Mount Height when mounted:||46 mm|
|Vacuum Mount Height at rest:||56 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
|Bait Board Internal Width:||559 mm|
|Bait Board Internal Depth:||305 mm
Conner steals the show with showing how seasuckers work.
A Florida-based designer, manufacturer, wholesaler and retaile...
How to clean your SeaSucker vacuum cup.
The 114 mm Black Vacuum Mount with Low Profile (LP) Housing The Low Profile 114 mm Vacuum Mount by SeaSucker is 8 mm shorter than our standard 114 mm Vacuum Mount. It also has two stainless steel...