SeaSucker Monkey Bars Product Photo - with 2 Year Warranty


Monkey Bars Folding - Modular Roof Rack

IN STOCK - Same business day shipping if order is placed before 3pm
Calculated at Checkout
  • SeaSucker Rack Pads - The wrap around pads for SeaSucker Roof Racks
  • SeaSucker Roof Rack Straps - 1 Pair

The SeaSucker Monkey Bars - Folding Version

The SeaSucker Monkey Bars is an all new product by SeaSucker. This was in response to customer feedback for a modular roof rack system. It can carry bikes, skis, paddle boards, surfboards and more. With the storage box option it can be used to transport almost anything.

This SeaSucker Monkey Bar is the "Folding" version which folds in reducing its width from 1,219 mm to 610 mm for easy storage. Over the next few months SeaSucker will release a host of options for the Monkey Bars that will bolt or attach to the aluminium bars.

Do you have a wide or narrow roof? Not a problem, the Vacuum Mounts can be relocated anywhere along the aluminium bar to suit the width of almost any car. The front bar has two 152 mm SeaSucker Vacuum Mounts on each side with one Vacuum Mount on each side of the rear bar. 

The SeaSucker Monkey Bars are robust enough to carry almost anything. This heavy duty roof rack system can transport just about anything at speeds up to 113 km/h (70 mph). Installation takes less than two minutes and removal takes seconds.

No more having to live with an ugly roof rack permanently bolted to your car creating wind noise and hurting your fuel economy. It's the only roof rack system you will ever buy; use it on your car, your friends car, your wife's car and the car you intend to buy in the future. For more information check out our Customer's Cars.

The Monkey Bars kit also comes with a spare 152 mm SeaSucker Vacuum Mount, keep it with your rack in case you accidentally damage one of your vacuum mounts. Some assembly may be required. Tools included: Allen/Hex Key and 7/16″ spanner.

Please Note: The wrap around pads and adjustable straps are an optional extra, we expect to take delivery of the wrap around pads and adjustable straps by the 6th February 2018. 

Product Features & Benefits 

  • You will save money by not having to buy a new roof rack every time you change cars
  • Use the same roof rack on your car, your partner's car or even a rental car
  • The easiest to install roof rack on the market; install it in 2 minutes, remove it in seconds.  

The SeaSucker Monkey Bars Kit includes

    • Roof Rack Bars - 2 x folding bars, 2 x HPDE platforms & 6 x 152 mm Vacuum Mounts (Pre-installed).
    • Spare Tyre - 1 x 152 mm Vacuum Mount & Protective Cover.
    • Protective Covers - 6 x 152 mm SeaSucker White Protective Covers.
    • Tools - Allen/Hex Key & 7/16" Spanner to install the platforms.
    • Cleaning Kit - Aluminium Water Spray Bottle & Micro-Fibre Cloth
    • 1 x 5g Lube Tube.
    • Marine-Grade Stainless Steel Hardware.
    • Instruction Manual.


Also refer to the Seasucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.  

152 mm Vacuum Mount Specifications
Maximum Pull Rating:  90 kg
Load Carrying Capacity: 31.75 kg
Vacuum Mount Diameter: 152 mm
Vacuum Mount Height when mounted: 46 mm
Vacuum Mount Height at rest: 56 mm
Housing Top Diameter:  60 mm
Housing Height Only: 33 mm
Housing Top Slot Width: 7 mm
Housing Top Slot Length: 14 mm
Housing Centre Thread:  ¼-20
Monkey Bars Specifications
Minimum Width: 610 mm
Maximum Width:  1,219 mm













Like our motto says NO DRILLS!  NO SCREWS!!  NO PROBLEMS!!!

We offer a 2 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 2 years of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.

Customers Also Viewed

SeaSucker Roof Rack / Board Rack Product Photo. Two year product warranty included.


Board Rack

What's new for the 2018 SeaSucker Board Rack / Roof Rack      The 2018 SeaSucker Board Rack / Roof Rack includes the following:        2 Year Warranty...

SeaSucker Ski Rack Product Photo with 2 year warranty

Ski & Snowboard Rack

What's new for the 2018 SeaSucker Ski & Snowboard Rack    The 2018 SeaSucker Ski & Snowboard Rack includes the following:      2 Year Warranty - Only at All...