SeaSucker Naked Head Rest Mount

Naked Headrest Mount

SKU:
6205
Condition:
New
Availability:
IN STOCK - Same business day shipping if order is placed before 3pm
Shipping:
Calculated at Checkout

The SeaSucker Naked Head Rest Mount

The SeaSucker Naked Headrest Mount is called “naked” because it does not require a bracket to hold your particular tablet device. Use it on almost any tablet device including iPads, Androids and whatever Microsoft or any other manufacturer comes up with.

The 114 mm SeaSucker vacuum mount sucks onto the back of your tablet and holds it tight with 45 kg of holding power. The integrated double-sided Velcro strap wraps around your headrest to ensure the tablet stays put. Once you are finished driving the SeaSucker Naked Head Rest mount can be removed within seconds.

NOTE: For some generation one iPads, you may have to put a sticker over the Apple logo on the back. This is due to the logo not being a complete seal; as a result it will cause the vacuum mount to loose vacuum prematurely. Just attach a stick over the logo (fortunately Apple gives you an Apple sticker in the iPad box), or use a hard-shell smooth case. 

Product Features & Benefits

  • You will save on the cost of replacing your tablet mount every time you upgrade your tablet device.
  • The cost of maintaining our vacuum mounts is very low; every part is replaceable and the pump is fully serviceable.
  • The one solution for many surfaces including steel, aluminium, glass, fibreglass, painted plaster and some non-skid surfaces.
  • If you change your mind you can relocate the SeaSucker Naked Headrest Mount in seconds and leave no marks behind.
  • You can use the SeaSucker Naked Headrest Mount on almost any vehicle that has a head rest.
  • You can attach the SeaSucker Naked Headrest Mount to almost any tablet device. 
WHAT'S IN THE BOX? 
  • The SeaSucker Naked Headrest Mount Kit includes
    • 1 x 114 mm White Vacuum Mount with 45 cm x 4cm Double-Sided Velcro Strap pre-installed
    • 1 x 114 mm SeaSucker White Protective Cover
    • SeaSucker Vacuum Mount User Guide
    • This kit arrives pre-assembled   

Specifications

Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions. 

114 mm Vacuum Mount Specifications
Maximum Pull Rating:  45 kg
Load Carrying Capacity: 18.14 kg
Vacuum Mount Diameter: 114 mm
Vacuum Mount Height when mounted: 45 mm
Vacuum Mount Height at rest: 52 mm
Housing Top Diameter:  60 mm
Housing Height Only: 33 mm
Housing Top Slot Width: 7 mm
Housing Top Slot Length: 14 mm
Housing Centre Thread:  ¼-20

 

 

 

 

 

 

 

  

 

 

 

 

Like our motto says NO DRILLS!  NO SCREWS!!  NO PROBLEMS!!! 

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.

Customers Also Viewed

SeaSucker Medium-Duty Handle. An ideal boat grab rail and can also be used to provide additional stability for the elderly and disabled

Medium-Duty Handle

SeaSucker Medium Duty Handle Do you need an extra grab rail on your boat? How about an extra grab rail on your hardtop? Having difficulties with balance and co-ordination around the home and...

Overhead Rod Holders. Product View

Overhead Rod Holders

The SeaSucker Overhead Rod Holder This is SeaSucker’s purpose boat rod holder; its primary purpose is rod storage underneath your hardtop. The SeaSucker Overhead Rod Holder can also...

SeaSucker Ski Rack Product Photo with 2 year warranty logo

Ski & Snowboard Rack

What's new for the 2017 SeaSucker Ski & Snowboard Rack    The 2017 SeaSucker Ski & Snowboard Rack includes the following:      2 Year Warranty - Only at All...

Total:
$0.00