What's new for the 2016 SeaSucker 15 mm through axle fork mount
As of the 20th September 2016 all SeaSucker Down Under sold 15 mm through axle fork mounts come with a 2 year warranty. The standard warranty elsewhere is 12 months. A Warranty Card is issued with each purchase. Please refer to the "Warranty" tab for more information.
SeaSucker 15 mm through axle Fork Mount
If you’re riding a bike with a through axle on the front, typically found on mountain bikes, you have two options for mounting to a SeaSucker rack:
- Use a Fork Adapter; or
- Use our new dedicated 15 mm fork mount.
The 15 mm fork mount is a bolt on unit, meant for people who are always using their SeaSucker bike rack with mountain bikes. This provides a more solid and steadier connection than using the adaptor.
The SeaSucker 15 mm through-axle fork mount is 10 cm or 100 mm wide, if your forks are 11 cm or 110 mm wide you have a "BOOST FRONT HUB". In order to use the SeaSucker 15 mm through-axle fork mount you will also need a Boost Spacer which is also sold through our online store.
To install, unbolt the existing fork mount (you’ll need an adjustable or 7/16″ wrench and a 5/32 hex wrench). Place the new fork mount in position and bolt on using the same hardware you just removed from the original fork mount.
Dimensions 10 cm x 3.8 cm x 4.4 cm. Mounting Holes 7.6 cm centre to centre, Ultra-rigid 9 mm skewer.
WHAT'S IN THE BOX?
- 1 x SeaSucker 15 mm through axle Fork Mount
|Base Length:||100 mm|
|Base width:||40 mm|
|Height when mounted:||59 mm|
|Distance between mounting holes:||75 mm|