SeaSucker 6-Rod Holder with two 152 mm SeaSucker Vacuum Mounts Need extra rod storage to store your big game gear. This boat rod holder is similar to SeaSucker’s flagship mdel, just a...
This is SeaSucker’s beefed up single rod holder; its purpose is rod transportation and light to medium trolling. Capable of transporting or trolling a light to medium rod / reel with ease; just mount it on a reasonably smooth and flat surface. Attach the baot rod holder where you need it; then if you need to move it elsewhere it can be removed in seconds!
There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.
One white PVC rod holder slides onto a 127 mm anodized aluminium track. The anodized aluminium track is bolted to a 152 mm Vacuum Mount packing 90 kg of holding power.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||90 kg|
|Load Carrying Capacity:||31.75 kg|
|Vacuum Mount Diameter:||152 mm|
|Vacuum Mount Height when mounted:||46 mm|
|Vacuum Mount Height at rest:||56 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
|Rod Holder Internal Diameter:||44 mm|
|Rod Holder Internal Depth:||304 mm|
|Aluminium Track Length:||406 mm
A Florida-based designer, manufacturer, wholesaler and retaile...
Conner steals the show with showing how seasuckers work.
How to clean your SeaSucker vacuum cup.
http://www.seasucker.com SeaSuckers are powerful vacuum-cup mo...
The 114 mm Black Vacuum Mount with Low Profile (LP) Housing The Low Profile 114 mm Vacuum Mount by SeaSucker is 8 mm shorter than our standard 114 mm Vacuum Mount. It also has two stainless steel...