The 2018 SeaSucker Trike Rack includes the following:
2 Year Warranty - All SeaSucker Down Under sold Trike Racks come with a 2 year warranty.
Redesigned vacuum pumps with impregnated red indicator bands - This prevents fading of the indicator band.
Spare 152 mm Vacuum Mount - Thank of it as a spare tyre in case you accidentally damage a vacuum mount.
Moulded rear wheel housing - It eliminates any sideways movement. Double-sided Velcro is used to secure the rear wheel.
Alum. Spray Bottle & Micro-Fibre Cloth - Only at SeaSucker Down Under. Fill with water, clean your car and the pads & moisten them prior to use.
The SeaSucker Trike Rack is specially made for all you three-wheelers out there. Two platforms with wheel hooks plus a wheel strap for your single wheel holds your trike securely on your car’s roof. Like all SeaSucker racks, it attaches and removes in seconds and fits on virtually any car (except convertibles). Its ultra-low profile design minimises wind noise. It's compact enough to fit inside the boot of your car when not in use.
The SeaSucker Trike Rack uses our incredibly strong 152 mm vacuum mounts each rated to 90 kg direct pull strength. This allows you to securely mount your trike to the roof of your car without the hassle of a permanent rack.
SeaSucker vacuum mounts are:
UV and Weather Resistant.
Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces.
Not suited on cars that have been Vinyl Wrapped as the Vacuum Mount will leave an indentation.
The SeaSucker Trike Rack uses five 152 mm SeaSucker vacuum mounts packing a direct pull strength of 450 kg to overcome aerodynamic forces. Included in the standard kit is one Wheel Strap (152 mm SeaSucker vacuum mounts with a hook-and-loop Velcro straps). The Wheel Strap secures your trike’s rear wheel.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
The SeaSucker Trike Rack Kit includes
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating (each):||90 kg|
|Load Carrying Capacity (each):||31.75 kg|
|Vacuum Mount Diameter:||152 mm|
|Vacuum Mount Height when in use:||46 mm|
|Vacuum Mount Height at rest:||56 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
2018 Christmas Promotion - 15% off ALL products Store-Wide Our 2018 Christmas promotion is underway Discount automatically applied to your Shopping Cart Limited stock of bike...
The 114 mm Black Vacuum Mount with Low Profile (LP) Housing The Low Profile 114 mm Vacuum Mount by SeaSucker is 8 mm shorter than our standard 114 mm Vacuum Mount. It also has two stainless steel...