This fork mount suits bikes with a 15 mm through-axle diameter and a 100 mm distance between the forks. Some bikes have a 110 mm fork width, this is also referred to as a BOOST FRONT HUB. Please measure your fork width before purchasing. If the fork width is 110 mm you will also need a Boost Spacer, this is available through our online store.
If you’re riding a bike with a Through-Axle Front Wheel, typically found on mountain bikes, you have two options for mounting to a SeaSucker rack:
The 15 mm fork mount is a bolt on unit, meant for people who are always using their SeaSucker bike rack with mountain bikes. To install, unbolt the existing fork mount (you’ll need an adjustable or 7/16″ wrench and a 5/32" hex wrench). Place the new fork mount in position and bolt on using the same hardware.
Please Note: The SeaSucker 15 mm x 100 mm Through-Axle Fork Mount is NOT compatible with the SeaSucker HUSKE Universal Plugs
1 x SeaSucker 15 mm x 100 mm Through-Axle Fork Mount (mounting hardware not included)
|Base Length:||100 mm|
|Base width:||40 mm|
|Height when mounted:||59 mm|
|Distance between mounting holes:||75 mm|
The 114 mm Black Vacuum Mount with Low Profile (LP) Housing The Low Profile 114 mm Vacuum Mount by SeaSucker is 8 mm shorter than our standard 114 mm Vacuum Mount. It also has two stainless steel...