Lee's Tackle 27mm (1") Clamp-On Boat Rod Holder Vertical Mount Tulip Tube The choice of boat manufacturers and consumers around the globe, Lee's Tackle are the Boat Rod Holder Specialist for over 50...
You'll never be short of storage for knives, pliers and hooks again no matter where you go. The Tool Holder is made from durable white starboard and has slots for four knives and three pliers and 19 hooks along the front edge.
Mounted on the side is a 114 mm SeaSucker Vacuum Mount with 45 kg of holding power. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 114 mm Vacuum Mount. There is plenty of surface area compatible with our Vacuum Mounts in fibreglass and aluminium boats, cars or around the home. A few pumps on the Vacuum Mount pump is all it takes to install the SeaSucker Tool Holder. Lift the Vacuum Cup tab and it pops off. Mount this Tool Holder on any vertical surface to keep your tools secure.
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||45 kg|
|Load Carrying Capacity:||18.14 kg|
|Vacuum Mount Diameter:||114 mm|
|Vacuum Mount Height when mounted:||45 mm|
|Vacuum Mount Height at rest:||52 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
The 114 mm Black Vacuum Mount with Low Profile (LP) Housing The Low Profile 114 mm Vacuum Mount by SeaSucker is 8 mm shorter than our standard 114 mm Vacuum Mount. It also has two stainless steel...
Lee's Tackle AO8715CR MKII 15ft Centre Rigger Bright Silver Poles with Black Spike Cast from marine grade anodized aluminium in Bright Silver the Lee's AO8715CR 15ft (4,572 mm)...