Got a new fish finder and you don't want to permanently mount the transducer? Then the SeaSucker transducer mount is just the thing for you!
Two 114 mm SeaSucker vacuum mounts are pre-attached to an anodised aluminium bar so you can mount it on your transom when needed and take it off easily when you’re putting the boat away. That's a combined direct pull rating of 90 kg. You will have to drill holes in the aluminium bar to match the screw pattern on your transducer.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||45 kg|
|Load Carrying Capacity:||18.14 kg|
|Vacuum Mount Diameter:||114 mm|
|Vacuum Mount Height when mounted:||45 mm|
|Vacuum Mount Height at rest:||52 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
The 114 mm Black Vacuum Mount with Low Profile (LP) Housing The Low Profile 114 mm Vacuum Mount by SeaSucker is 8 mm shorter than our standard 114 mm Vacuum Mount. It also has two stainless steel...
What's new for the 2021 SeaSucker Komodo The 2021 SeaSucker Komodo includes the following: SeaSucker Hogg Front Wheel Holder - Included with the SeaSucker...