What's new for the 2019 SeaSucker Bomber
The 2019 SeaSucker Bomber includes the following:
HUSKE Universal Fork Mount Base - It can accommodate QR 9 mm x 100 mm, TA 12 mm x 100 mm, 15 mm x 100 mm & 15 mm x 110 mm front wheels by inter-changing Plugs
HUSKE QR Plugs & Skewer - The 2019 Bomber includes the HUSKE QR Plugs & skewer as standard. For bikes with QR Front Wheels
2 Year Warranty - All SeaSucker Down Under sold Bomber Bike Racks come with a 2 year warranty.
Revised 152 mm Vacuum Mounts - Larger release tab, vacuum pad with rounded "O" ring, improves holding time & strength.
Spare Vacuum Pump - Think of it as a spare tyre in case one vacuum mount is accidentally damaged.
Tools - Allen Key & Ring Spanner is included to install the fork mounts.
Crank Arm Straps - Three 280 mm x 19 mm double-sided Velcro straps to secure the crank arms. Check out our Customer's Cars.
Alum. Spray Bottle & Micro-Fibre Cloth - Only at SeaSucker Down Under. Fill with water, clean your car and the pads & moisten them prior to use.
Redesigned vacuum pumps with impregnated red indicator bands - Prevents fading of the indicator band.
Moulded rear wheel housings - Eliminates sideways movement. Double-sided Velcro secures the rear wheel.
The SeaSucker Bomber is a 3-bike fork-mounted bike rack that attaches to most sedans, SUV or Minivans. It can be mounted on the roof, boot, front windscreen or rear window.
The SeaSucker Bomber can be installed in under two minutes and removed in seconds, no tools required. Its ultra-low profile minimises wind noise and provides greater clearance to fit under carports and garages. It is compact enough to fit inside the boot of your car when not in use.
SeaSucker vacuum mounts are:
UV and Weather Resistant.
Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces.
Not suited on cars that have been Vinyl Wrapped as the Vacuum Mount will leave an indentation.
It allows you to temporarily but securely mount your bikes without the hassle of a permanent bike rack.
The 19 mm High-Density Polyethylene (HDPE) “V” shaped body flexes to conform to your car’s roof-line curvature. The SeaSucker Bomber has five 152 mm SeaSucker vacuum mounts secured to its “V” shaped body with marine-grade stainless steel hardware. Included in the standard kit are three Rear Wheel Straps (152 mm SeaSucker vacuum mounts with double-sided Velcro straps). They prevent the bike’s rear wheel from sliding left or right.
The SeaSucker Bomber comes with three HUSKE quick release fork mount bases and three quick release plugs and skewers, once adjusted you can release and secure you bike in seconds. The SeaSucker Bomber requires some minor assembly. Tools included are:Allen Key; and a 7/16″ spanner.
The SeaSucker Bomber Bike Rack Kit includes:
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
||3 bicycles, up to 20 kg each
|Bike Rack Type:||Fork Mounted (front wheel must be removed)|
|Vehcile Attachment Location:||Roof Top, Boot Lid or Hatchback|
|Vehicle Surface:||Steel, Aluminium, Glass, Fibreglass & Carbon Fibre|
|Vehicle Type:||Small & Large Sedans, SUV's or Minivans|
|Fork Mounts with kit:||3 x HUSKE Fork Mount Bases & 3 x 9 mm Quick-Release Plugs & Skewers|
|Vacuum Mounts on Main Board:||5 x 152 mm SeaSucker Vacuum Mounts|
|Rear Wheel Straps:||3 x Rear Wheel Straps with Velcro
|Main Board thickness (HDPE):||19 mm|
|Vehicle footprint length:||(41 inches) - 1,041.4 mm (unobstructed)
|Vehicle footprint width:||(11 inches) - 280 mm (unobstructed)|
|Weight:||8 kg Approx.|
SeaSucker bike racks have ridiculous holding strength. Speeds...
Updated version of our original SeaSucker Pops A Wheelie video...
SeaSucker racks are never coming off. www.seasucker.com
SeaSucker racks are strong enough for the long haul.
What's new for the 2018 SeaSucker Komodo The 2018 SeaSucker Komodo includes the following: SeaSucker Hogg Front Wheel Holder - Included with the SeaSucker...