GPS & Fish Finder Mounts

GPS & Fish Finder Mounts by SeaSucker SeaSucker Authorised Distributor Logo

Almost every electronic device in your boat has a life span. Often when it comes time to replace it the new electronic device will have different mounting holes. Tired of drilling holes in your boat only to have them filled or worst still discovering rot or rust underneath. Then check out our innovative GPS, Fish Finder and Camera mounting solutions.

Buy with confidence from Australia's Authorised Distributor of SeaSucker vacuum mounted marine products and accessories.

  • Camera Mount with 114 mm SeaSucker. Compatible with most photographic and video cameras

    SeaSucker

    Camera Mount with 114 mm SeaSucker

    SeaSucker Camera Mount with 114 mm Vacuum Mount Need to secure your camera out on the water? How about taking remote controlled shots or taking photos using the timer. This adjustable camera mount is ideal for any hand-held or pocket-sized...

  • SeaSucker EPIRB Mount kit includes stainless steel hardware to secure your EPIRB to the 114 mm Vacuum Mount

    SeaSucker

    EPIRB Mount

    The SeaSucker EPIRB Mount The SeaSucker EPIRB Mount is the ideal way of securing your EPIRB in your boat whilst making it super easy to remove and re install. It also allows you to keep your EPIRB always within easy reach. When you need it most' all you...

  • S a l e
    Garmin 400/500/600 Series Mount

    SeaSucker

    Garmin 400/500/600 Series Mount

    The SeaSucker Garmin 400/500/600 Series Mount Our 114 mm SeaSucker Vacuum Mount has plenty of power to hold most small electronics to your console. It will mount your Garmin 400, 500 or 600 Series GPS (the kind with the circular base)...

  • S a l e
    SeaSucker Garmin 76 Mount

    SeaSucker

    Garmin 76 Mount with 114 mm SeaSucker

    The SeaSucker Garmin 76 Mount Our 114 mm SeaSucker Vacuum Mount has plenty of power to hold most marine electronics to your console. It will mount your Garmin 76 perfectly and allows you to position it to best suit the conditions...

  • 114 mm SeaSucker Go Pro Mount with Go Pro camera installed

    SeaSucker

    Go Pro Mount with Long Thumb Knob

    The 114 mm SeaSucker Go Pro Mount The SeaSucker 114 mm Go Pro Mount is an ideal way to mount your Go Pro Camera! The Go Pro Tripod adapter is compatible with the Go Pro Hero 3 & Hero 4 camera.  Included in the kit is the Go Pro Long Thumb Knob...

  • S a l e
    RAM Holder Garmin 76 Colour Series Mount with GPS installed (RAM-HOL-GA14U)

    RAM Mounts

    RAM Holder Garmin 76 Colour Series Mount

     Garmin 76 Series Mount Only RAM Mount’s Garmin 76 bracket fits your handheld GPS perfectly; the 76-series GPS easily snaps in an out of the RAM bracket. This RAM Cradle will work with the Garmin GPSMAP 76C, GPSMAP 76CS, GPSMAP...

  • SeaSucker Transducer Mount Product Photo

    SeaSucker

    Transducer Mount

    The SeaSucker Transducer Mount Got a new fish finder and you don't want to permanently mount the transducer? Then the SeaSucker transducer mount is just the thing for you! Two 114 mm SeaSucker vacuum mounts are pre-attached to an anodized aluminum...

  • SeaSucker Video Camera Mount - With Camera Atatched

    SeaSucker

    Video Camera Mount

    SeaSucker Video Camera Mount SeaSucker’s adjustable video camera mount works with virtually any camera, including bigger video equipment. Now, you don't have to fight over who's going to hold the camera when you're hauling in that big fish...

Discounted Prices

Total:
$0.00