The SeaSucker Talon includes the following:
2 Year Warranty - All SeaSucker Down Under sold Talon Bike Racks come with a 2 year warranty.
Revised 152 mm Vacuum Mounts - Larger release tab, vacuum pad with rounded "O" ring, improves holding time & strength.
Spare Vacuum Pump - Think of it as a spare tyre in case one vacuum mount is accidentally damaged.
Tools - Allen Key & Ring Spanner is included to install the fork mounts.
Crank Arm Strap - One 280 mm x 19 mm double-sided Velcro strap to secure the crank arms. Check out our Customer's Cars.
Alum. Spray Bottle & Micro-Fibre Cloth - Only at SeaSucker Down Under. Fill with water, clean your car and the pads & moisten them prior to use.
Redesigned vacuum pumps with impregnated red indicator bands - Prevents fading of the indicator band.
Molded rear wheel housing - Eliminates sideways movement. Double-sided Velcro secures the rear wheel.
The 2023 SeaSucker Talon is our basic bike rack. Therefore, this bike rack does NOT include any SeaSucker HUSKE Plugs or skewers. This enables the customer to only chose the HSUKE plugs they require. If you are still unsure which HUSKE plugs to chose, please READ THIS ARTICLE
For customers who have a mix of QR and TA bikes SeaSucker introduced the SeaSucker Talon MAX Series of bike racks. The SeaSucker Talon MAX will include the QR 9 mm x 100 mm plugs and skewer along with the TA 12 mm x 100 mm, 15 mm x 100 mm & 15 mm x 110 mm plugs as standard. The SeaSucker MAX series bike racks will be available by the end of February 2023
The SeaSucker Talon Single Bike Rack
The SeaSucker Talon is our go anywhere single bike rack; use it on almost any car with ease. It’s small enough to be taken on board a plane as carry on board luggage. It's powerful enough to be used on interstate trips. That's ideal for cycling holidays when hiring a car at your destination.
The SeaSucker Talon can be installed in under two minutes and removed in seconds; no tools required. Its ultra-low profile minimizes wind noise and provides greater clearance under carports and garages. It fits easily inside the boot of your car when not in use.
The SeaSucker Talon is a single bike fork-mounted bike rack and uses our incredibly strong 152 mm vacuum mounts each rated to 90 kg direct pull strength. Secure your bike to the roof of your car without the hassle of a permanent bike rack. It can also be mounted on your boot, rear window or your SUV’s back glass.
SeaSucker vacuum mounts are:
UV and Weather Resistant.
Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces.
Not suited on cars that have been Vinyl Wrapped
The 19 mm High-Density Polyethylene (HDPE) “L” shaped body conforms to your car’s roof-line. The SeaSucker Talon has three 152 mm SeaSucker vacuum mounts secured to the main board with marine-grade stainless steel hardware. Packing a combined direct pull strength of 360 kg the SeaSucker Talon has plenty of muscle and in-built redundancy.
Included in the kit is one Rear Wheel Strap (152 mm SeaSucker Vacuum Mount with molded housing and double-sided Velcro strap). It secures your bike’s rear wheel and keeps it from sliding left or right.
The SeaSucker Talon comes with one HUSKE Universal Fork Mount Base. The Quick-Release Plugs and Skewer are compatible with any bike that has "Drop Out" front forks. In other words, if you removed the front wheel of your bike expect to find a "Slot" at the bottom of each fork. If so, your bike has a Quick-Release or Drop Out Front Wheel. If you are still unsure which HUSKE plugs to chose, please READ THIS ARTICLE
Some minor assembly is required. The supplied tools are: Allen/hex Key; and a 7/16″ spanner.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
The SeaSucker Talon Bike Rack - Through-Axle Deluxe Kit includes
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
||1 bicycle only, max. 20 kg
|Bike Rack Type:||Fork Mounted (front wheel must be removed)|
|Vehcile Attachment Location:||Roof Top, Boot Lid or Hatchback|
|Vehicle Surface:||Steel, Aluminium, Glass, Fibreglass & Carbon Fibre|
|Vehicle Type:||Sedans, SUV's or Minivans|
|Fork Mount Type:||1 x HUSKE Universal Fork Mount Base|
|Vacuum Mounts on Main Board:||Three 152 mm SeaSucker Vacuum Mounts|
|Number of Rear Wheel Straps:||One Rear Wheel Strap with Velcro
|Main Board thickness (HDPE):||19 mm|
|Required vehicle surface length:||(15 inches) - 381 mm (unobstructed)
|Required vehicle surface width:||(13 inches) - 330 mm (unobstructed)|
|Weight:||2.4 kg Approx.
SeaSucker bike racks have ridiculous holding strength. Speeds...
Updated version of our original SeaSucker Pops A Wheelie video...
SeaSucker racks are never coming off. www.seasucker.com
SeaSucker racks are strong enough for the long haul.
"How do I install my new SeaSucker rack?"
The @SeaSucker Talon is simple to use has revolutionized the a...
Just a peak how well the SeaSucker Talon Bike Rack works with ...