2021 SeaSucker Talon Product Photo with HUSKE Universal Fork Mount Base & Quick-Release Plugs & Skewer as standard equipment. Two year warranty included


2022 Talon - Single Bike Rack

IN STOCK - Same business day shipping if order is placed before 3pm
  • HUSKE 12 mm x 100 mm Through-Axle Plugs
  • HUSKE 15 mm x 100 mm Through-Axle Plugs
  • HUSKE 15 mm x 110 mm Through-Axle Plugs
  • SeaSucker Talon Carry Bag
  • SeaSucker Flight Deck Product Photo

What's new for the 2022 SeaSucker Talon 

The 2022 SeaSucker Talon includes the following:    
  1. HUSKE Universal Fork Mount Base -  It can accommodate QR 9 mm x 100 mm, TA 12 mm x 100 mm, 15 mm x 100 mm & 15 mm x 110 mm front wheels by inter-changing Plugs
  2. HUSKE QR Plugs & Skewer  - The 2022 Talon includes the HUSKE QR Plugs & skewer as standard. For bikes with QR Front Wheels
  3. 2 Year Warranty - All SeaSucker Down Under sold Talon Bike Racks come with a 2 year warranty.  
  4. Revised 152 mm Vacuum Mounts - Larger release tab, vacuum pad with rounded "O" ring, improves holding time & strength.
  5. Spare Vacuum Pump - Think of it as a spare tyre in case one vacuum mount is accidentally damaged.
  6. Tools - Allen Key & Ring Spanner is included to install the fork mounts.
  7. Crank Arm Strap -  One 280 mm x 19 mm double-sided Velcro strap to secure the crank arms. Check out our Customer's Cars.
  8. Alum. Spray Bottle & Micro-Fibre Cloth - Only at SeaSucker Down Under. Fill with water, clean your car and the pads & moisten them prior to use.
  9. Redesigned vacuum pumps with impregnated red indicator bands - Prevents fading of the indicator band.
  10. Molded rear wheel housing - Eliminates sideways movement. Double-sided Velcro secures the rear wheel.  

Can I transport my e-Bike with a SeaSucker Talon? 

The SeaSucker Talon is rated to transport any bike up to 20 kg. Most e-Bikes weigh approx 20 to 25 kg although this weight doesn't include the front wheel. That being the case, we recommend removing the bike's battery prior to transport. This should reduce the overall weight below the 20 kg limit. If you prefer not to remove the battery we recommend the SeaSucker Mini Bomber 2-Bike Rack which is rated to transport 2 bikes up to 20 kg each or a single bike up to 40 kg. The SeaSucker Mini Bomber also has an extra set of fork mount holes in the centre of the bike rack enabling an additional fork mount to be installed.

The SeaSucker Talon Single Bike Rack

The SeaSucker Talon is our go anywhere single bike rack; use it on almost any car with ease. It’s small enough to be taken on board a plane as carry on board luggage. It's powerful enough to be used on interstate trips. That's ideal for cycling holidays when hiring a car at your destination. 

The SeaSucker Talon can be installed in under two minutes and removed in seconds; no tools required. Its ultra-low profile minimizes wind noise and provides greater clearance under carports and garages. It fits easily inside the boot of your car when not in use.

The SeaSucker Talon is a single bike fork-mounted bike rack and uses our incredibly strong 152 mm vacuum mounts each rated to 90 kg direct pull strength. Secure your bike to the roof of your car without the hassle of a permanent bike rack. It can also be mounted on your boot, rear window or your SUV’s back glass. 

SeaSucker vacuum mounts are: 
  • Non-Marking.
  • UV and Weather Resistant.
  • Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces. 
  • Not suited on cars that have been Vinyl Wrapped

The 19 mm High-Density Polyethylene (HDPE) “L” shaped body conforms to your car’s roof-line. The SeaSucker Talon has three 152 mm SeaSucker vacuum mounts secured to the main board with marine-grade stainless steel hardware. Packing a combined direct pull strength of 360 kg the SeaSucker Talon has plenty of muscle and in-built redundancy.

Included in the kit is one Rear Wheel Strap (152 mm SeaSucker Vacuum Mount with molded housing and double-sided Velcro strap). It secures your bike’s rear wheel and keeps it from sliding left or right. 

The SeaSucker Talon comes with one HUSKE Universal Fork Mount Base with 9 mm Quick-Release Plugs and Skewer. The Quick-Release Plugs and Skewer are compatible with any bike that has "Drop Out" front forks. In other words, if you removed the front wheel of your bike expect to find a "Slot" at the bottom of each fork. If so, your bike has a Quick-Release or Drop Out Front Wheel

 Some minor assembly is required. The supplied tools are: Allen/hex Key; and a 7/16″ spanner.

Like our motto says NO DRILLS!  NO SCREWS!!  NO PROBLEMS!!!

Product Features & Benefits

  • The easiest to install bike rack on the market; installed in under 2 minutes, removed within seconds.
  • You will save money with the HUSKE Fork Mount base as it eliminates the need for dedicated fork mounts or adapters
  • You will save money by not having to buy another bike rack when you change cars.
  • You will save money through reduced fuel consumption by not leaving your bike rack permanently installed on your car.
  • Use the SeaSucker Talon on your car, your partner's car and your friends car.
  • Fantastic for cycling holidays as you can use it on most rental cars.
  • Small enough to be taken on board a plane as carry on board luggage.
  • Ultra-low vertical profile gives you more clearance to fit under carports and garages. 

The SeaSucker Talon Bike Rack - Through-Axle Deluxe Kit includes

  • Main Board - 1 x SeaSucker Talon Main Board with 3 x 152 mm Vacuum Mounts pre-installed
  • HUSKE Universal Fork Mount - 1 x SeaSucker HUSKE Universal Fork Mount Base
  • HUSKE Quick-Release (QR) Plugs & Skewer - For bikes with QR Front Wheels.
  • HUSKE Through-Axle Plugs - Your choice of either 12 mm x 100 mm, 15 mm x 100 mm or 15 mm x 110 mm HUSKE Through-Axle Plugs
  • Flight Deck - Front Wheel Holder that transports your front wheel alongside your back wheel
  • Front Wheel Adapter - Used with the Flight Deck to transport a Through-Axle Front Wheel
  • Rear Wheel Strap - 1 x 152 mm SeaSucker Vacuum Mount with molded housing and double-sided Velcro strap pre-installed.
  • Crank Arm Strap - 1 x 280 mm x 19 mm Double-sided Velcro strap.
  • Spare Tyre - 1 x SeaSucker Black Vacuum Pump
  • Protective Covers - 4 x 152 mm SeaSucker White Vacuum Mount Protective Covers
  • Cleaning Kit - Aluminium Water Spray Bottle & Micro-Fibre Cloth.
  • Tools - Allen/Hex Key & 7/16" Spanner
  • Marine-grade stainless steel hardware
  • Instruction Manual
  • 5 g Lube Tube for vacuum pump maintenance.


Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.  

SeaSucker Talon Bike Rack Specifications
Bicycle Capacity 
1 bicycle only, max. 20 kg
Bike Rack Type:  Fork Mounted (front wheel must be removed)
Vehcile Attachment Location: Roof Top, Boot Lid or Hatchback
Vehicle Surface: Steel, Aluminium, Glass, Fibreglass & Carbon Fibre 
Vehicle Type:  Sedans, SUV's or Minivans
Fork Mount Type:   1 x HUSKE Universal Fork Mount Base
Fork Mount Plugs 1 x HUSKE 9 mm x 100 mm QR Plugs and Skewer
Vacuum Mounts on Main Board:  Three 152 mm SeaSucker Vacuum Mounts 
Number of Rear Wheel Straps: One Rear Wheel Strap with Velcro
Main Board thickness (HDPE):  19 mm
Required vehicle surface length:  (15 inches) - 381 mm (unobstructed)
Required vehicle surface width:  (13 inches) - 330 mm (unobstructed)
Weight:  2.4 kg Approx.

We offer a 2 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 2 years of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.

Customers Also Viewed

S a l e
2021 SeaSucker Bomber 3 Bike Rack product photo


2022 Bomber - 3 Bike Rack

What's new for the 2022 SeaSucker Bomber   The 2022 SeaSucker Bomber includes the following:    HUSKE Universal Fork Mount Base -  It can accommodate QR 9 mm...

S a l e
SeaSucker Roof Rack / Board Rack Product Photo. Two year product warranty included.


Board Rack

What's new for the 2021 SeaSucker Board Rack / Roof Rack      The 2021 SeaSucker Board Rack / Roof Rack includes the following:        2 Year Warranty...

S a l e
SeaSucker Trike Rack with 2 Year Warranty only at SeaSucker Down Under


Trike Rack

What's new for the 2021 SeaSucker Trike Rack     The 2021 SeaSucker Trike Rack includes the following:      2 Year Warranty - All SeaSucker Down Under...

S a l e
SeaSucker Ski Rack Product Photo with 2 year warranty


Ski & Snowboard Rack

What's new for the 2021 SeaSucker Ski & Snowboard Rack    The 2021 SeaSucker Ski & Snowboard Rack includes the following:      2 Year Warranty - Only...