null
Lee's Tackle Junior Holder Wishbone Style Outrigger Bases (OH226S)

Lee’s Tackle

Lee's OH226S - Junior Holder Wishbone Style Outrigger Bases

SKU:
OH226S
Condition:
New
Availability:
IN STOCK - Same business day shipping if order is placed before 3pm

Lee's Tackle Junior Holder Wishbone Style Outrigger Bases  (2 in x 18 in Main Tube )

The Lee's Tackle Original Wishbone Style Outrigger Holder has been in production for over 45 years. Lee's Tackle set the standard for "Junior Outrigger Holders", it has often been imitated but never equalled. It's ease of operation, adjustable fishing angle, ability to lay down for bridges and small footprint makes it the ideal holder for a multitude of boats.

Durability was the watchword at its conception. Constructed of heavy-duty brass forgings, heavy wall brass pipe and a stainless steel main tube, it epitomizes strength and reliability. The three-point mounting system provides maximum strength and distributes the mounting surface stress over a wide area. The Lee's Tackle Original Wishbone Style Outrigger Holder can be mounted vertically or angled toward the stern, between twenty to thirty-five degrees is normal.

The Lee's Tackle Original Wishbone Style Outrigger Holder has a 2" x 18" Main Tube (OH226S) and is designed for use with our deluxe 19ft. single spreader poles and non-spreader poles up to 22ft.

Using the Lee's Tackle Original Wishbone Style Outrigger Holder

To deploy the Outrigger into the fishing position, simply open the locking gate and loosen the clamp housing. The clamp housing then slides down the main tube until you either lock it or it meets one of the stop collar's preset fishing positions. To lower the unit for passing under bridges, leave the locking gate closed and the clamp locked to the top of the main tube. Remove the eye bolt, thus separating the clamp housing from the wishbone. The main tube is then lowered into the supplied lay down hook.

WHAT'S IN THE BOX

2 x Junior Holder Wishbone Style Outrigger Bases 

Specifications 
Lee's Junior Holder Wishbone Style Outrigger Bases 
Main Tube Specifications: 51 mm (2") x 457 mm (18")"
Compatible Outrigger Lengths: 4.9 m (16 ft) to 6.7 m (22 ft) 

 

  

 

 

 

 
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.

Customers Also Viewed

Total:
$0.00