Lee's Tackle SW9300 Sidewinder Bolt-On Lay-Down Outrigger Mounts
The Lee's SW9300 Sidewinder Bolt-On Lay-Down Outrigger Mounts are built to the high standards of workmanship you have come to expect from Lee's Tackle; the no-compromise design integrates both performance and elegance. It's efficient at trolling baits, both natural and artificial, and also looks great.
Cast from marine grade anodized aluminium in Bright Silver the Lee's Tackle SW9300 Sidewinder Bolt-On Lay Down Outrigger Mounts have proven to be an effective tool when trolling baits, both natural and artificial. The Lee's SW9300 Sidewinder Bolt-On Lay-Down Outrigger Mounts are a below T-Top or Hardtop operation. The can be locked in from 0 through to 80 degree out trolling positions. The mounts locks when the handle is up or down and they rotate when the handle is to the left or right. By far the fastest lay-down outrigger mounts on the market.
The Lee's SW9300 Sidewinder Bolt-On Lay-Down Outrigger Mounts automatically lock into position when raising or lowering the pole with no knobs to loosen or tighten. Just pull down the ridged collar and lower or raise the pole. No ball bearings to rust with internal Delrin and nylon bearing surfaces to provide a smooth operation and prevent metal to metal contact. They are compatible with the Lee's 16ft Extra Strong (AP3916XS) or 18ft (AP3918) Outrigger Poles. Has 102 mm (4") x 152 mm (6") mounting plate. Extends 356 mm (14") above and 216 mm (8-1/2") below mounting plate. Fits all outrigger ready boats.
Please Note: This product is sold as a pair, includes two Lee's SW9300 Sidewinder Bolt-On Lay Down Outrigger Mounts. The Lee's SW9901 Backing Plate is not included.
WHAT'S IN THE BOX?
1 x Pair of Lee's Tackle SW9300 Sidewinder Bolt-On Lay-Down Outrigger Mounts (two outrigger mounts in the box)
Specifications
Lee's Tackle SW9300 Sidewinder Bolt-On Lay-Down Outrigger Mounts | Internal Diameter: | 41.275 mm (1 5/8") |
| Height below mounting plate when lowered: | 216 mm (8.5") |
| Height below mounting plate when raised: | 356 mm (14") |
| Mounting Plate Length: | 152 mm (6") |
| Mounting Plate Width: | 102 mm (4") |
| Minimum Trolling Position Angle: | 0 Degrees |
| Maximum Trolling Position Angle: | 80 Degress |
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Free Australia-Wide Shipping for orders over $200
