What's new for the 2022 SeaSucker Mini Bomber Through-Axle (TA) Deluxe Kit
Introducing the 2022 SeaSucker Mini Bomber - Through-Axle Deluxe Kit, it's a SeaSucker Mini Bomber with the lot. Aimed at the cycling enthusiast that has a Quick-Release and/or a Through-Axle bike and limited space in the car, the 2021 SeaSucker Mini Bomber - Through-Axle Deluxe Kit includes the following:
- 2022 SeaSucker Mini Bomber - The 2022 SeaSucker Mini Bomber kit includes everything you need to transport both a Quick-Release and/or a Through-Axle bike of your choosing
- 2 x 2021 SeaSucker Flight Decks - SeaSucker's Front Wheel Holder tat integrates with the SeaSucker Talon Rear Wheel Strap.
- 2 x SeaSucker HUSKE TA Plugs - Included in this kit is your choice of either 12 mm x 100 mm, 15 mm x 100 mm or 15 mm x 110 mm HUSKE Through-Axle Plugs
- 2 x SeaSucker Front Wheel Adapters - Available in 12 mm and 15 mm diameter this will be supplied in accordance with your HUSKE Plug selection. The SeaSucker Front Wheel Adapter is used with the Flight Deck, the SeaSucker Front Wheel Adapter converts a Through-Axle front wheel into a Quick-Release front wheel for easy transport.
The SeaSucker Mini Bomber 2-Bike Rack TA Deluxe Kit
The SeaSucker Mini Bomber Through-Axle (TA) Deluxe Kit includes everything you need to transport two Through-Axle Bikes. It also saves space by not having to transport the front wheel inside the car. It is our versatile single bike rack; use it on almost any car with ease. The SeaSucker Mini Bomber TA Deluxe is our most versatile bike rack capable of carrying two bikes with ease. It can be installed in under two minutes and removed in seconds, no tools required. Its ultra-low profile minimizes wind noise and provides greater clearance to fit under carports and garages. Its compact enough to fit inside your boot when not in use.
The SeaSucker Mini Bomber TA Deluxe is a 2 bike fork-mounted bike rack using our incredibly strong 152 mm vacuum mounts; each rated to 90 kg direct pull strength. Transport your bikes without the hassle and added fuel cost of a permanent bike rack.
It can be mounted on your roof, boot, front windscreen, rear window or your SUV’s back glass.
SeaSucker vacuum mounts are:
-
Non-Marking.
-
UV and Weather Resistant.
-
Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces.
-
Not suited on cars that have been Vinyl Wrapped as the Vacuum Mount will leave an indentation.
The 19 mm High-Density Polyethylene (HDPE) “V” shaped body conforms to your car’s roof-line. The SeaSucker Mini Bomber TA Deluxe has four 152 mm SeaSucker vacuum mounts secured to its “V” shaped body with marine-grade stainless steel hardware.
Packing a combined direct pull strength of 540 kg the SeaSucker Mini Bomber TA Deluxe has plenty of muscle and in-built redundancy. Included in the standard kit are two Molded Rear Wheel Straps (152 mm SeaSucker vacuum mounts with double-sided Velcro straps). The Rear Wheel Strap secures your bike’s rear wheel and keeps it from sliding left or right.
The SeaSucker Mini Bomber TA Deluxe comes with two HUSKE quick release fork mount bases and two quick release plugs and skewers. Once the quick-release skewer is adjusted to suit your bike you can release and secure you bike in seconds.
Some minor assembly is required. Tools included are: Allen Key; and a 7/16″ spanner.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Product Features & Benefits
- The easiest to install bike rack on the market; installed in under 2 minutes, removed within seconds
- You will save money with the HUSKE Fork Mount base as it eliminates the need for dedicated fork mounts or adapters
- You will save money by not having to buy another bike rack when you change cars
- You will save money through reduced fuel consumption by not leaving your bike rack permanently installed on your car.
- Use the SeaSucker Mini Bomber on your car, your partner's car and your friends car
- Fantastic for cycling holidays as it will work with most rental cars
- Easy to transport even on board a plane
- Ultra-low vertical profile gives you more clearance to fit under carports and garages
WHAT'S IN THE BOX?
The SeaSucker Mini Bomber TA Deluxe Bike Rack Kit includes
- Main Board - 1 x SeaSucker Mini Bomber Main Board with 4 x 152 mm Vacuum Mounts pre-installed.
- HUSKE Universal Fork Mounts - 2 x SeaSucker HUSKE Universal Fork Mount Bases
- HUSKE Quick-Release (QR) Plugs & Skewers - For bikes with QR Front Wheels.
- 2 x HUSKE Through-Axle Plugs - Your choice of either 12 mm x 100 mm, 15 mm x 100 mm or 15 mm x 110 mm HUSKE Through-Axle Plugs
- 2 x Flight Decks - Front Wheel Holder that transports your front wheel alongside your back wheel
- Front Wheel Adapter - Used with the Flight Deck to transport a Through-Axle Front Wheel
- Rear Wheel Straps - 2 x 152 mm SeaSucker Moulded Vacuum Mounts with double-sided Velcro straps pre-installed.
- Crank Arm Straps - 2 x 280 mm x 19 mm Double-sided Velcro straps.
- Spare Tyre - 1 x SeaSucker Black Vacuum Pump.
- Protective Covers - 6 x 152 mm SeaSucker White Vacuum Mount Protective Covers
- Cleaning Kit - Aluminium Water Spray Bottle & Micro-Fibre Cloth.
- Tools - Allen Key & 7/16" Spanner to install the Fork Mounts
- Stainless Steel Hardware
- Instruction Manual
- 5 g Lube Tube for vacuum pump maintenance
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
SeaSucker Mini Bomber Bike Rack Specifications
Bicycle Capacity
|
2 bicycles, max. 20 kg each
|
| Bike Rack Type: |
Fork Mounted (front wheel must be removed) |
| Vehicle Attachment Location: |
Roof Top, Boot Lid or Hatchback |
| Vehicle Surface: |
Steel, Aluminium, Glass, Fibreglass & Carbon Fibre |
| Vehicle Type: |
Most Sedans, SUV's or Minivans |
| Fork Mount Type: |
2 x HUSKE Fork Mount Bases & 2 x 9 mm Quick-Release Plugs & Skewers |
| Vacuum Mounts on Main Board: |
4 x 152 mm SeaSucker Vacuum Mounts |
| Rear Wheel Straps: |
2 x Moulded Rear Wheel Straps with Velcro
|
| Main Board thickness (HDPE): |
19 mm |
| Vehicle footprint length: |
(29.875 inches) - 760 mm (unobstructed)
|
| Vehicle footprint width: |
(8.125 inches) - 206 mm (unobstructed) |
| Weight: |
4.9 kg Approx.
|
We offer a 2 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 2 years of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
WHAT'S IN THE BOX?
The SeaSucker Mini Bomber TA Deluxe Bike Rack Kit includes
- Main Board - 1 x SeaSucker Mini Bomber Main Board with 4 x 152 mm Vacuum Mounts pre-installed.
- HUSKE Universal Fork Mounts - 2 x SeaSucker HUSKE Universal Fork Mount Bases
- HUSKE Quick-Release (QR) Plugs & Skewers - For bikes with QR Front Wheels.
- 2 x HUSKE Through-Axle Plugs - Your choice of either 12 mm x 100 mm, 15 mm x 100 mm or 15 mm x 110 mm HUSKE Through-Axle Plugs
- 2 x Flight Decks - Front Wheel Holder that transports your front wheel alongside your back wheel
- Front Wheel Adapter - Used with the Flight Deck to transport a Through-Axle Front Wheel
- Rear Wheel Straps - 2 x 152 mm SeaSucker Moulded Vacuum Mounts with double-sided Velcro straps pre-installed.
- Crank Arm Straps - 2 x 280 mm x 19 mm Double-sided Velcro straps.
- Spare Tyre - 1 x SeaSucker Black Vacuum Pump.
- Protective Covers - 6 x 152 mm SeaSucker White Vacuum Mount Protective Covers
- Cleaning Kit - Aluminium Water Spray Bottle & Micro-Fibre Cloth.
- Tools - Allen Key & 7/16" Spanner to install the Fork Mounts
- Stainless Steel Hardware
- Instruction Manual
- 5 g Lube Tube for vacuum pump maintenance
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
SeaSucker Mini Bomber Bike Rack Specifications
Bicycle Capacity
|
2 bicycles, max. 20 kg each
|
| Bike Rack Type: |
Fork Mounted (front wheel must be removed) |
| Vehicle Attachment Location: |
Roof Top, Boot Lid or Hatchback |
| Vehicle Surface: |
Steel, Aluminium, Glass, Fibreglass & Carbon Fibre |
| Vehicle Type: |
Most Sedans, SUV's or Minivans |
| Fork Mount Type: |
2 x HUSKE Fork Mount Bases & 2 x 9 mm Quick-Release Plugs & Skewers |
| Vacuum Mounts on Main Board: |
4 x 152 mm SeaSucker Vacuum Mounts |
| Rear Wheel Straps: |
2 x Moulded Rear Wheel Straps with Velcro
|
| Main Board thickness (HDPE): |
19 mm |
| Vehicle footprint length: |
(29.875 inches) - 760 mm (unobstructed)
|
| Vehicle footprint width: |
(8.125 inches) - 206 mm (unobstructed) |
| Weight: |
4.9 kg Approx.
|
Free Australia-Wide Shipping for orders over $200
