The SeaSucker Monkey Bars - Straight Version
The SeaSucker Monkey Bars is an all new product by SeaSucker. This was in response to customer feedback for a modular roof rack system. It can carry bikes, skis, paddle boards, surfboards and more. With the storage box option it can be used to transport almost anything.
The SeaSucker Monkey Bar straight version has fixed width bars that are 1,219 mm in length. Over the next few months SeaSucker will release a host of options for the Monkey Bars that will bolt or attach to the aluminium bars.
Do you have a wide or narrow roof? Not a problem, the Vacuum Mounts can be relocated anywhere along the aluminium bar to suite the width of almost any car.
The front bar has two 152 mm SeaSucker Vacuum Mounts on each side with one Vacuum Mount on each side of the rear bar. To protect your Paddle Board whilst being transported the Monkey Bars include a set of 50 cm wrap-around pads.
The SeaSucker Monkey Bars are robust enough to carry almost anything. This heavy duty roof rack system can transport just about anything at speeds up to 113 km/h (70 mph). Installation takes less than two minutes and removal takes seconds.
No more having to live with an ugly roof rack permanently bolted to your car creating wind noise and hurting your fuel economy. It is the only roof rack system you will ever buy; use it on your car, your friends car, your wife's car and the car you intend to buy in the future. For more information check out our Customer's Cars.
The Monkey Bars kit also comes with a spare 152 mm SeaSucker Vacuum Mount, keep it with your rack in case you accidentally damage one of your vacuum mounts. Some assembly may be required. Tools included: Allen/Hex Key and 7/16″ spanner.
Please Note: The wrap around pads are an optional extra, we expect to take delivery of the wrap around pads by the 31st January 2018
Product Features & Benefits
- You will save money by not having to buy a new roof rack every time you change cars
- Use the same roof rack on your car, your partner's car or even a rental car
- The easiest to install roof rack on the market; install it in 2 minutes, remove it in seconds.
WHAT'S IN THE BOX?
The SeaSucker Monkey Bars Kit includes
- Roof Rack Bars - 2 x Fixed Length Bars (or folding bars if chosen), 2 x HPDE platforms & 6 x 152 mm Vacuum Mounts (Pre-installed).
- Spare Tyre - 1 x 152 mm Vacuum Mount & Protective Cover.
- Protective Covers - 6 x 152 mm SeaSucker White Protective Covers.
- Tools - Allen/Hex Key & 7/16" Spanner to install the platforms.
- Cleaning Kit - Aluminium Water Spray Bottle & Micro-Fibre Cloth
- 1 x 5g Lube Tube.
- Marine-Grade Stainless Steel Hardware.
- Instruction Manual.
Also refer to the Seasucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||90 kg|
|Load Carrying Capacity:||31.75 kg|
|Vacuum Mount Diameter:||152 mm|
|Vacuum Mount Height when mounted:||46 mm|
|Vacuum Mount Height at rest:||56 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
|Maximum Width:||1,219 mm
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!