The SeaSucker Monkey Bars is an all new product by SeaSucker. This was in response to customer feedback for a modular roof rack system. It can carry bikes, skis, paddle boards, surfboards and more. Bolt on a storage box and transport almost anything.
The SeaSucker Monkey Bar has fixed width bars that are 1,219 mm in length. Most common rof rack accessories can be bolted to the Monkey Bars using "U" bolts or clamps.
If storing a roof rack with 1,219 mm bars is an issue the consider "Folding Roof Rack Bars" option. This reduces the overall length to 610 mm for easy storage.
Do you have a wide or narrow roof? Not a problem, the roof rack posts can be relocated anywhere along the aluminium bar to suit the width of any car. The front bar has two 152 mm SeaSucker Vacuum Mounts on each side with one Vacuum Mount on each side of the rear bar.
SeaSucker vacuum mounts are:
UV and Weather Resistant.
Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces.
Not suited on cars that have been Vinyl Wrapped as the Vacuum Mount will leave an indentation.
The SeaSucker Monkey Bars are robust enough to carry almost anything. This heavy duty roof rack system can transport loads up to 68 kg (150 pounds) at speeds up to 113 km/h (70 mph). Installation takes less than two minutes and removal takes seconds.
No more having to live with an ugly roof rack permanently bolted to your car creating wind noise and hurting your fuel economy. It's the only roof rack system you will ever buy; use it on your car, your friends car, your wife's car and the car you intend to buy in the future. For more information check out our Customer's Cars.
The Monkey Bars kit comes with a spare 152 mm SeaSucker Vacuum Mount, keep it with your rack in case you accidentally damage a vacuum mounts. Some assembly may be required. Tools included: Allen/Hex Key and 7/16″ spanner.
Please Note: The wrap around pads and adjustable straps are an optional extra,
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
The SeaSucker Monkey Bars Kit includes
Also refer to the Seasucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||90 kg|
|Load Carrying Capacity:||31.75 kg|
|Vacuum Mount Diameter:||152 mm|
|Vacuum Mount Height when mounted:||46 mm|
|Vacuum Mount Height at rest:||56 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
|Fixed Length Bars:||1,219 mm
|Folding Bars:||610 mm to 1,219 mm|
|Vehicle Surface:||Steel, Aluminium, Glass, Fibreglass & Carbon Fibre|
2018 Christmas Promotion - 15% off ALL products Store-Wide Our 2018 Christmas promotion is underway Discount automatically applied to your Shopping Cart Limited stock of bike...