Looking for an easy way to secure your paddle without it floating away or worse still becoming submerged. The SeaSucker solution uses the 114 mm vacuum mount attached to a paddle clip so when you’re fishing or just enjoying time on your paddle board the paddle won't get lost. Best of all you won't have to drill any holes in your paddle board.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||45 kg|
|Load Carrying Capacity:||18.14 kg|
|Vacuum Mount Diameter:||114 mm|
|Vacuum Mount Height when mounted:||45 mm|
|Vacuum Mount Height at rest:||52 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
RAM B-Size 1 inch Ball / Diamond Plate Black aluminium diamond-shaped plate used for mounting onto RAM’s phone holders and hand-held electronics mounts. Rubber coated ball; works with RAM...
RAM B-Size 1 inch Ball / Plate / Stud Constructed from black aluminium plate with a diameter of approximately 62 mm. The 25 mm ball is welded to the plate and protected with a rubber...
RAM B-Size Socket Arm for RAM B-Size 1 inch balls The RAM B-Size Socket Arm is 95 mm long and has an integrated thumb screw for locking down onto the RAM B-Sized Balls. The RAM B-Size...
RAM Cradle for the Garmin Colorado 300, 400c, 400i & 400t The RAM Cradle for the Garmin Colorado 300, 400c, 400i & 400t handheld GPS series is made from high strength composite...