SeaSucker Trainer Flex Mount - iPad
The SeaSucker Trainer Flex Mount is ideal for mounting an iPad on a bike when using high-tech training programs like Zwift. This eliminates the need to hold the iPad or other tablet device when training. Essentially the SeaSucker Trainer Flex Mount was derived from our very popular SeaSucker iPad / Galaxy Mount. The SeaSucker Trainer Flex Mount - iPad consists of an easy-to-use handle bar clamp, a 178 mm highly adjustable arm enabling you to find the perfect viewing angle, a 114 mm SeaSucker Vacuum Mount with 45 kg pull rating and a SeaSucker zippered travel case.
We do not recommend using the SeaSucker Trainer Flex Mount outside of a controlled environment like a gym, it will be so distracting you may end up riding into the back of a car.
Please Note: There is a known issue with the first generation iPad and the current iPad Pro Series. The Apple logo on both model iPad's does not have a perfect seal, hence our vacuum mounts can suck air through the logo. The end result its SeaSucker Vacuum Mount will not hold vacuum. This can be overcome by placing a sticker over the logo such that it completely covers the logo. This can be done using just about any form of tape as long as the logo is completely covered
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
WHAT'S IN THE BOX
The SeaSucker Trainer Flex Mount - iPad Kit includes
- 1 x Handle Bar Clamp
- 1 x 178 mm Naked Flex Arm
- 1 x 114 mm SeaSucker Black Vacuum Mount
- 1 x 114 mm SeaSucker White Protective Cover
- 1 x Compact Zippered Case
- 1 x Lube Tube for pump maintenance
- Instruction Manual
- Some basic assembly; no tools required
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
114 mm Vacuum Mount Specifications
| Maximum Pull Rating (each): |
45 kg |
| Load Carrying Capacity (each): |
18.14 kg |
| Vacuum Mount Diameter: |
114 mm |
| Vacuum Mount Height when in use: |
45 mm |
| Vacuum Mount Height at rest: |
52 mm |
| Housing Top Diameter: |
60 mm |
| Housing Height Only: |
33 mm |
| Housing Top Slot Width: |
7 mm |
| Housing Top Slot Length: |
14 mm |
| Housing Centre Thread: |
¼-20
|
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
WHAT'S IN THE BOX
The SeaSucker Trainer Flex Mount - iPad Kit includes
- 1 x Handle Bar Clamp
- 1 x 178 mm Naked Flex Arm
- 1 x 114 mm SeaSucker Black Vacuum Mount
- 1 x 114 mm SeaSucker White Protective Cover
- 1 x Compact Zippered Case
- 1 x Lube Tube for pump maintenance
- Instruction Manual
- Some basic assembly; no tools required
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
114 mm Vacuum Mount Specifications
| Maximum Pull Rating (each): |
45 kg |
| Load Carrying Capacity (each): |
18.14 kg |
| Vacuum Mount Diameter: |
114 mm |
| Vacuum Mount Height when in use: |
45 mm |
| Vacuum Mount Height at rest: |
52 mm |
| Housing Top Diameter: |
60 mm |
| Housing Height Only: |
33 mm |
| Housing Top Slot Width: |
7 mm |
| Housing Top Slot Length: |
14 mm |
| Housing Centre Thread: |
¼-20
|
Free Australia-Wide Shipping for orders over $200
