SeaSucker Universal Off-Road Mounting Kit
Looking For A Temporary Solution To Mount A Flag, Shovel or Axe outside your car? Have You Had Enough Drilling Holes Into Your Car Or Using Straps That Leave Behind Scratches? Introducing the SeaSucker Universal Off-Road Mount. The SeaSucker Off-Road Mount Incorporates a Pivoting Clamp and an Anodized Aluminum Lock Knob To Easily Secure Your Load. Furthermore, the Pivoting Clamp has a minimum internal diameter of 25 mm And Will Expand To 33 mm by loosening the Anodized Aluminum Lock Knob.
Powering the SeaSucker Off-Road Mount is The SeaSucker 114 mm Black Vacuum Mount with 45 kg Direct Pull-Strength And a Load Carrying Capacity of 18 kg. Simply, pump up the SeaSucker Off-Road Mount And You Are Ready To Secure Your Load.
Product Features & Benefits
- Install and remove your Flag, Shovel, Pole & More in seconds without drilling holes
- It's a truly multi-purpose solution that can be used on almost any car.
- Save money by using the same Universal Off-Road Mount setup on many cars.
WHAT'S IN THE BOX?
- 1x SeaSucker Universal Off-Road Mount with 1 x 114 mm SeaSucker Black Vacuum Mounts (pre-installed)
- 1 x Spare Vacuum Pump
- 1 x Instructions
Specifications
Maximum Pull Rating: |
45 kg |
Load Carrying Capacity: |
18.14 kg |
Vacuum Mount Diameter: |
114 mm |
Vacuum Mount Height when mounted: |
45 mm |
Vacuum Mount Height at rest: |
52 mm |
Housing Top Diameter: |
60 mm |
Housing Height Only: |
33 mm |
Housing Top Slot Width: |
7 mm |
Housing Top Slot Length: |
14 mm |
Housing Centre Thread: |
¼-20
|
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.