SeaSucker Utility Hook
We know you already have a use for this all-purpose hook, whether it's for holding dock lines, a life ring or hand lines. Made of strong UV-stable plastic, the 32 mm thick hook has an opening spread of approximately 95 mm. Comes pre-attached to a powerful 114 mm SeaSucker White Vacuum Mount.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
WHAT'S IN THE BOX?
- 1 x 32 mm Utility Hook with a 95 mm wide opening
- 1 x 114 mm SeaSucker White Vacuum Mount
- 1 x 114 mm SeaSucker White Protective Cover
- SeaSucker Vacuum Mount User Guide
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
114 mm Vacuum Mount Specifications
| Maximum Pull Rating: |
45 kg |
| Load Carrying Capacity: |
18.14 kg |
| Vacuum Mount Diameter: |
114 mm |
| Vacuum Mount Height when mounted: |
45 mm |
| Vacuum Mount Height at rest: |
52 mm |
| Housing Top Diameter: |
60 mm |
| Housing Height Only: |
33 mm |
| Housing Top Slot Width: |
7 mm |
| Housing Top Slot Length: |
14 mm |
| Housing Centre Thread: |
¼-20
|
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
114 mm Vacuum Mount Specifications
| Maximum Pull Rating: |
45 kg |
| Load Carrying Capacity: |
18.14 kg |
| Vacuum Mount Diameter: |
114 mm |
| Vacuum Mount Height when mounted: |
45 mm |
| Vacuum Mount Height at rest: |
52 mm |
| Housing Top Diameter: |
60 mm |
| Housing Height Only: |
33 mm |
| Housing Top Slot Width: |
7 mm |
| Housing Top Slot Length: |
14 mm |
| Housing Centre Thread: |
¼-20
|
Free Australia-Wide Shipping for orders over $200
