The SeaSucker 3 Cup Holder will attach to virtually any vertical surface on your boat or car or caravan etc.. The SeaSucker 3 Cup Holder Vertical Mount is a truly removable Boat Drinks Holder solution and is super quick to install and remove. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 114 mm Vacuum Mount. There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats.
A few pumps on the vacuum mount pump is all it takes to install this Boat Drinks Holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.
The 89 mm cup inserts can accommodate most drinks with the foam insulation / stubbie holder still wrapped around them. Swap out the cup holder insert for an optional Small Dry Box (small waterproof storage box for your wallet, Smartphone, etc.) Made from 19 mm white starboard. Comes with a 114 mm Vacuum Mount for plenty of holding power.
Click on the highlighted RED name below to view the detailed product description.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||45 kg|
|Load Carrying Capacity:||18.14 kg|
|Vacuum Mount Diameter:||114 mm|
|Vacuum Mount Height when mounted:||45 mm|
|Vacuum Mount Height at rest:||52 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
|Cup Holder Overall Length:||356 mm|
|Cup Holder Overall Width:||178 mm|
|Cup Holder Internal Diameter:||89 mm|
|Cup Holder Max. Depth:||80 mm|
|Cup Holder Min. Depth:||57 mm
A Florida-based designer, manufacturer, wholesaler and retaile...
Conner steals the show with showing how seasuckers work.
How to clean your SeaSucker vacuum cup.
http://www.seasucker.com SeaSuckers are powerful vacuum-cup mo...
The 114 mm Black Vacuum Mount with Low Profile (LP) Housing The Low Profile 114 mm Vacuum Mount by SeaSucker is 8 mm shorter than our standard 114 mm Vacuum Mount. It also has two stainless steel...