SeaSucker Pro Series 3-Rod Holder with 152 mm Vacuum Mount product photo

SeaSucker

Pro Series 3-Rod Holder Vertical Mount

SKU:
5083
Condition:
New
Availability:
19th Agust 2019 - Enter your email below and press NOTIFY ME to be notified when product is back in stock

SeaSucker Pro Series 3-Rod Holder with 152 mm Vacuum Mount

The Pro Series rod holders by SeaSucker feature a custom HDPE frame with holes to accommodate the fishing rod holder and the fishing rod butt pins. The HDPE frame provides a more secure platform and will not rust.

This purpose of this rod holder is rod storage and transportation. Capable of transporting three medium to heavy rods / reels with ease; just mount it on a reasonably smooth and flat surface. Attach the boat rod holder where you need it; then if you need to move it elsewhere it can be removed in seconds!

There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.

One 152 mm Vacuum Mount pre-installed on the HDPE frame using marine grade stainless steel hardware. This provides the muscle to keep your fishing rods secure. Three white PVC rod holders slide into the HDPE frame. Rod holder internal dimensions: 304 mm x 44 mm; they have removable pins at the bottom for slotted rod butts. 

Like our motto says NO DRILLS!  NO SCREWS!!  NO PROBLEMS!!! 

Product Features & Benefits

  • You will save on the cost of having to fill in holes ever time, this can get very expensive!
  • You will save money by not having to buy the same equipment for your next boat.
  • The cost of maintaining our vacuum mounts is very low; every part is replaceable and the pump is serviceable.
  • The one solution for many surfaces including steel, aluminium, glass, fibreglass and some non-skid surfaces.
  • If you change your mind you can relocate the boat rod holder in seconds and leave no marks behind.
  • It's the only boat rod holder on the market that can be used in almost any boat.
  • If you are going out in your friends boat and he is short on rod storage just take this boat rod holder with you. 

 

WHAT'S IN THE BOX? 
  • SeaSucker Pro Series 3-Rod Holder includes
    • 3 x PVC Rod Holders
    • 1 x HDPE frame 
    • 1 x 152 mm SeaSucker White Vacuum Mount (pre-installed)
    • 1 x 152 mm SeaSucker White Protective Cover
    • SeaSucker Vacuum Mount User Guide 
    • Some basic assembly; no tools required  

 

Specifications

Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions. 

152 mm Vacuum Mount Specifications
Maximum Pull Rating:  90 kg
Load Carrying Capacity: 31.75 kg
Vacuum Mount Diameter: 152 mm
Vacuum Mount Height when mounted: 46 mm
Vacuum Mount Height at rest: 56 mm
Housing Top Diameter:  60 mm
Housing Height Only: 33 mm
Housing Top Slot Width: 7 mm
Housing Top Slot Length: 14 mm
Housing Centre Thread:  ¼-20
3-Rod Holder Specifications
Rod Holder Internal Diameter:  44 mm
Rod Holder Internal Depth: 304 mm
HPDE Frame Length: 406 mm

 

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.

Customers Also Viewed

SeaSucker Horizontal Rod Holder Front View

SeaSucker

Horizontal Rod Holders

SeaSucker Horizontal Rod Holder This is SeaSucker’s purpose built boat rod holder; its primary purpose is rod storage along your gunwales. Whilst all other SeaSucker boat rod holders...

Total:
$0.00