The Seasucker 4 Cup Holder with Large Dry Box
This 4 cup holder also includes a Large Dry Box, which fits snugly into the slot in between the cup holders. This provides you with ideal waterproof storage for wallets, smartphones, keys, cameras, etc.
The SeaSucker 4 Cup Holder with Large Dry Box is a truly removable Boat Drinks Holder solution and is super quick to install and remove. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 114 mm Vacuum Mount. There is plenty of surface area compatible with our Vacuum Mounts in fibreglass and aluminium boats. A few pumps on the Vacuum Mount pump is all it takes to install this Boat Drinks Holder. Lift the Vacuum Cup tab and it pops off. To protect the Vacuum Mount when not in use press the included Protective Cover over the Vacuum Cup and you're done.
The 89 mm cup inserts can accommodate most drinks with the foam insulation / stubbie holder still wrapped around them. Made from 19 mm white starboard. Comes with a 114 mm SeaSucker Vacuum Mount packing 45 kg of holding power.
Product Features & Benefits
- You will save on the cost of having to fill in holes ever time, this can get very expensive!
- You will save money by not having to buy the same accessory for your next boat.
- The cost of maintaining our vacuum mounts is very low; every part is replaceable and the pump is fully serviceable.
- The one solution for many surfaces including steel, aluminium, glass, fibreglass and some non-skid surfaces.
- If you change your mind you can relocate the 4 Cup Holder in seconds and leave no marks behind.
- It's the only Boat Drinks Holder on the market that can be easily used in almost any boat.
- It's your own personal Boat Dinks Holder; going out in your friends boat, just take the 4 Cup Holder Holder with you.
Product Options Explained
Click on the highlighted RED name below to view the detailed product description.
- DrinX Cup Holder Insert - Helps keep your drinks cool; provides a snug fit for smaller bottles and cans.
- Yoebi Stemware Holder - Ideal for securing long stemware glasses like a wine glass, margarita glass or martini glass.
WHAT'S IN THE BOX?
- The SeaSucker 4 Cup Holder with Large Dry Box Kit includes
- 1 x SeaSucker 4 Cup Horizontal Mount Frame
- 4 x 89 mm Cup Inserts
- 1 x Large Dry Box
- 1 x 114 mm SeaSucker White Vacuum Mount
- 1 x 114 mm SeaSucker White Protective Cover
- SeaSucker Vacuum Mount User Guide
- This kit arrives pre-assembled
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||45 kg|
|Load Carrying Capacity:||18.14 kg|
|Vacuum Mount Diameter:||114 mm|
|Vacuum Mount Height when mounted:||45 mm|
|Vacuum Mount Height at rest:||52 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
|Cup Holder Overall Length:||483 mm|
|Cup Holder Overall Width:||254 mm|
|Cup Holder Internal Diameter:||89 mm|
|Cup Holder Max. Depth:||80 mm|
|Cup Holder Min. Depth:||57 mm|
|Large Dry Box Length:||109 mm|
|Large Dry Box Width:||89 mm|
|Large Dry Box Height:||89 mm|
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!