SeaSucker
1-Cup Holder - Vertical Mount
SeaSucker 1-Cup Holder Vertical Mount This is your personal cup holder - never again will your drink spill over. It d
Free Australia-Wide Shipping for orders over $200
The SeaSucker low-profile 4 Cup Holder will attach to virtually any vertical surface on your boat or car or caravan etc.. The SeaSucker 4 Cup Holder Vertical Mount is a truly removable Boat Drinks Holder solution and is super quick to install and remove. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 114 mm Vacuum Mount. There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats.
A few pumps on the vacuum mount pump is all it takes to install this Boat Drinks Holder. Lift the Vacuum Cup tab and it pops off. To protect the Vacuum Mount when not in use press the included protective cover over the vacuum cup and you're done.
The 89 mm cup inserts can accommodate most drinks with the foam insulation / stubbie holder still wrapped around them. Or swap out one of the cup holder inserts for an optional Small Dry Box (a small waterproof storage box for your wallet, Smartphone, etc.) Made from 19 mm white starboard. Comes with a 114 mm Vacuum Mount for packing 45 kg of holding power.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
Maximum Pull Rating: | 45 kg |
Load Carrying Capacity: | 18.14 kg |
Vacuum Mount Diameter: | 114 mm |
Vacuum Mount Height when mounted: | 45 mm |
Vacuum Mount Height at rest: | 52 mm |
Housing Top Diameter: | 60 mm |
Housing Height Only: | 33 mm |
Housing Top Slot Width: | 7 mm |
Housing Top Slot Length: | 14 mm |
Housing Centre Thread: | ¼-20 |
Cup Holder Overall Length: | 559 mm |
Cup Holder Overall Width: | 127 mm |
Cup Holder Internal Diameter: | 89 mm |
Cup Holder Max. Depth: | 80 mm |
Cup Holder Min. Depth: | 57 mm |