Classic Ski & Snowboard Rack (SK2420)


Classic Ski & Snowboard Rack

IN STOCK - Same Business Day Shipping if order is placed before 3pm

What's new for the SeaSucker Classic Ski & Snowboard Rack   

The SeaSucker Classic Ski & Snowboard Rack includes the following:     

  1. New Clam Shell Design - Designed in house and fitted with soft rubber padding the All New Clam Shell Design will transport four sets of skis or two snowboards. Furthermore, the new design fully integrates the 152 mm vacuum mounts.
  2. Security - New Design enables the use of a padlock or cable lock on the Clam Shell. The cable lock in conjunction with a SeaSucker Anchor Point prevents the removal of your skis. (Cable Lock & Anchor Point Not Included)
  3. 2 Year Warranty - Only at All SeaSucker Down Under. The manufacturer's warranty is 12 months. Check out our Customer's Cars.
  4. Pivoting Vacuum Mounts - This enables the ski rack to conform to highly curved roof lines. 
  5. Improved clearance - The pivoting vacuum mounts also provide greater clearance to store skis on top of each other.
  6. Spare Vacuum Pump - Think of it as a spare tyre in case one vacuum mount is accidentally damaged. 
  7. Tools - Allen Key & Ring Spanner is included to install the fork mounts.
  8. Alum. Spray Bottle & Micro-Fibre Cloth - Only at SeaSucker Down Under. Fill with water, clean your car and the pads & moisten them prior to use.
  9. Redesigned vacuum pumps with impregnated red indicator bands - This prevents fading of the indicator band.

SeaSucker Classic Ski & Snowboard Rack 

The SeaSucker Ski & Snowboard Rack consists of a front and back locking carrier for your skis and snowboards. Each carrier is secured on to your car’s roof with two 152 mm SeaSucker Vacuum Mounts.

SeaSucker vacuum mounts are: 

  • Non-Marking.
  • UV and Weather Resistant.
  • Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces. 
  • Not suited on cars that have been Vinyl Wrapped as the Vacuum Mount will leave an indentation.

The SeaSucker Classic Ski Rack has been improved to provide greater clearance between the locking carriers and your car's roof line to store ski's on top of each other. This increases the carrying capacity of the Ski Rack and is dependent on the height of your bindings. The vacuum mounts can also pivot enabling them to conform to highly curved roof lines.

The SeaSucker Ski & Snowboard Rack has soft rubber padding inside the carriers to safely grip your skis or snowboards without scratching them. They can also carry skateboards including most electric skateboards. Each carrier section can be locked using a cable lock (not provided). Each carrier has 61 cm of holding space.

The SeaSucker Classic Ski & Snowboard Rack is a removable ski rack solution suitable for almost any vehicle, just check out the customer video. 



The SeaSucker Classic Ski & Snowboard Rack includes

    • Ski Carriers - 2 x Integrated Ski Carriers with 61 cm of holding space & 4 x 152 mm Vacuum Mounts.
    • Spare Tyre - 1 x SeaSucker Black Vacuum Pump.
    • Protective Covers - 4 x 152 mm SeaSucker White Protective Covers.
    • Tools - Allen/Hex Key & 7/16" Spanner to assemble the Ski Rack.
    • Cleaning Kit - Aluminium Water Spray Bottle & Micro-Fibre Cloth.
    • Marine-Grade Stainless Steel Hardware.
    • Instruction Manual.



Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.  

152 mm Vacuum Mount Specifications
Maximum Pull Rating:  90 kg
Load Carrying Capacity: 31.75 kg
Vacuum Mount Diameter: 152 mm
Vacuum Mount Height when mounted: 46 mm
Vacuum Mount Height at rest: 56 mm
Housing Top Diameter:  60 mm
Housing Height Only: 33 mm
Housing Top Slot Width: 7 mm
Housing Top Slot Length: 14 mm
Housing Centre Thread:  ¼-20
Ski Rack Specifications
Length: 820 mm
Depth of Each Ski Clamp 155 mm
Height when mounted: 212 mm
Ski Rack internal length  610 mm
Vehicle Surface Steel, Aluminium, Glass, Fibreglass & Carbon Fibre 


We offer a 2 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 2 years of the date of original purchase to SeaSucker for replacement or repair. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.