SeaSucker Roof Rack / Board Rack Product Photo. Two year product warranty included.


Board Rack

IN STOCK - Same business day shipping if order is placed before 3pm

What's new for the 2022 SeaSucker Board Rack / Roof Rack     

The 2022 SeaSucker Board Rack / Roof Rack includes the following:       

  1. 2 Year Warranty - All SeaSucker Down Under sold Board Racks come with a 2 year warranty..
  2. Spare SeaSucker Vacuum Pump - In case you accidentally damage one of the vacuum mounts. To replace a vacuum pump takes a few minutes.
  3. Tools - Allen/Hex Key & 7/16" Spanner to assemble the board rack.
  4. Aluminium Spray Bottle & Micro-Fibre Cloth - Only at SeaSucker Down Under. Fill with water only, clean your car and the vacuum pads & moisten them prior to use.  
  5. Redesigned vacuum pumps with red indicator bands - The indicator bands are impregnated into the pump, this prevents fading of the indicator band.

The SeaSucker Board Rack / Roof Rack

The SeaSucker Board Rack / Roof Rack is great for transporting surfboards, canoes and kayaks and robust enough to carry almost anything. Below are an overview of its specifications (please refer to the Specifications tab for more information)

  • Rated to transport goods up to 45 kg (100 lbs)
  • Footprint Width Including the Vacuum Mounts 795 mm
    • Requires a minimum of 160 mm of unobstructed space at either end of its footprint for the vacuum mounts to work
    • i.e. from 0 mm to 160 mm and from 635 mm to 795 mm needs to be a hard and smooth surface with no breaks
  • Ideal Mounting Location - Front Crossbar closest to the front windscreen, rear Crossbar closest to rear window (or whereever there is a sharp bend in the roofline)
  • Can safely transport goods up to 113 kph (70 mph)

The SeaSucker Board Rack has fixed bars made from HDPE that are 790 mm wide. It has six 152 mm Vacuum Mounts with 540 kg of holding power. To ensure your load stays put the kit comes with two 3 metre adjustable straps. To protect your load whilst being transported the standard kit includes wrap-around pads for each bar. Installation takes less than one minute and removal takes seconds. 

SeaSucker vacuum mounts are:  
  • Non-Marking.
  • UV and Weather Resistant.
  • Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces. 
  • Not suited on cars that have been Vinyl Wrapped as the Vacuum Mount will leave an indentation. 

No more having to live with an ugly roof rack permanently bolted to your car creating wind noise and hurting your fuel economy. It is the only roof rack system you will ever buy; use it on your car, your friends car, your partner's car and the car you intend to buy in the future. 

The SeaSucker Board Rack / Roof Rack kit also comes with a spare SeaSucker Black Vacuum PumpSome assembly may be required. Tools included: 5/32″ Allen/Hex Key and 7/16″ Spanner. 

Like our motto says NO DRILLS!  NO SCREWS!!  NO PROBLEMS!!!

Product Features & Benefits

  • You will save money by not having to buy a new roof rack every time you change cars
  • Use the same roof rack on your car, your partner's car or even a rental car
  • The easiest to install roof rack on the market; install it in a few minutes, remove it in seconds. 



The SeaSucker Board Rack / Roof Rack Kit includes

    • Board Rack Bars - 2 x HDPE Bars (79 cm wide), 2 x HDPE front platforms & 6 x 152 mm Vacuum Mounts (Pre-installed).
    • Wrap Around Pads - 2 x 500 mm Wrap Around Pads.
    • Tie-Down Straps - 2 x 3,000 mm Adjustable Straps.
    • Spare Tyre - 1 x SeaSucker Black Vacuum Pump.
    • Protective Covers - 6 x 152 mm SeaSucker White Protective Covers
    • Cleaning Kit - Aluminium Water Spray Bottle & Micro-Fibre Cloth
    • 1 x 5g Lube Tube for vacuum pump maintenance.
    • Marine-Grade Stainless Steel Hardware
    • Instruction Manual



Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.  

152 mm Vacuum Mount Specifications
Maximum Pull Rating:  90 kg
Load Carrying Capacity: 31.75 kg
Vacuum Mount Diameter: 152 mm
Vacuum Mount Height when mounted: 46 mm
Vacuum Mount Height at rest: 56 mm
Housing Top Diameter:  60 mm
Housing Height Only: 33 mm
Housing Top Slot Width: 7 mm
Housing Top Slot Length: 14 mm
Housing Centre Thread:  ¼-20
Board Rack / Roof Rack Specifications
Weight Rating: 45 kg (100 lbs)
Speed Rating: 113 kph (70 mph)
Product Width/Footprint (including vacuum mounts):  795 mm
Minimum height when mounted including the wrap around pads 21 mm
Product Weight: 6.7 kg
Vehicle Surface: Steel, Aluminium, Glass, Fibreglass & Carbon Fibre 


We offer a 2 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 2 years of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.