GMRS Antenna Pivot Mount Product Photo (SM6171)


GMRS Antenna Pivot Mount

IN STOCK - Same business day shipping if order is placed before 3pm

SeaSucker GMRS Antenna Pivot Mount

After the success of the RAM Mounts Antenna Mount (RAM-112U) we took it one step further and introduced a solution for the General Mobile Radio Service (GMRS). Introducing the SeaSucker GMRS Antenna Pivot Mount, a truly non-magnetic Antenna Mount that won't damage your car. Included in this kit is the Nagoya Mount, five metre length of cable, and a Bingfu Antenna.

The holding power comes from the SeaSucker 114 mm Black Vacuum Mount, powered with 45 kg of Direct Pull Strength and a 18 kg Load Carrying Capacity. The SeaSucker GMRS Antenna Pivot Mount can be mounted horizontally or vertically or anywhere in between. To set the ideal Antenna Angle loosen the Locking Knob on the RAM Mount Antenna Mount. Once the ideal position is found please tighten the Locking Knob. This kit is supplied Pre-Assembled and ready to go on your car. 


  • 1 x SeaSucker GMRS Antenna Pivot Mount with  SeaSucker 114 mm Black Vacuum Mount (pre-assembled)
  • 1 x Vacuum Mount Instructions


114 mm Vacuum Mount Specifications
Maximum Pull Rating:  45 kg
Load Carrying Capacity: 18 kg
Vacuum Mount Diameter: 114 mm
Vacuum Mount Height when mounted: 46 mm
Vacuum Mount Height at rest: 56 mm
Housing Top Diameter:  60 mm
Housing Height Only: 33 mm
Housing Top Slot Width: 7 mm
Housing Top Slot Length: 14 mm
Housing Male Thread On Top  ¼-20
We offer a 2 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 2 years of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.