SeaSucker Heavy-Duty Rod Holder
Need extra rod storage space or a boat rod holder capable of taking the pressure of a fish strike? Have you been looking for a way to get a centre line into your trolling spread? Maybe you are after the strongest single boat rod holder SeaSucker makes.
It's primary purpose is both trolling and rod transportation; capable of trolling heavy game rods / reels. Attach the Heavy-Duty Trolling Unit where you need it; then if you need to move it elsewhere it can be removed in seconds! All it needs is a reasonably smooth and flat surface to attach the two integrated SeaSucker 114 mm Vacuum Mounts.
Bolted to the back of the Heavy-Duty Rod Holder are two 114 mm SeaSucker Vacuum Mounts packing 180 kg of holding power. Rod holder has a TBA mm internal diameter; has a plastic insert; is TBA mm deep and pinned at the bottom for slotted rod butts. Rod Holder Dimensions: TBA
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
WHAT'S IN THE BOX?
- The SeaSucker Heavy-Duty Rod Holder includes
- 1 x SeaSucker Heavy-Duty Rod Holder
- 2 x 114 mm SeaSucker White Vacuum Mounts (Pre-installed)
- 2 x 114 mm SeaSucker White Protective Covers
- SeaSucker Vacuum Mount User Guide
- This kit arrives pre-assembled
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
152 mm Vacuum Mount Specifications
Maximum Pull Rating: |
90 kg |
Load Carrying Capacity: |
31.75 kg |
Vacuum Mount Diameter: |
152 mm |
Vacuum Mount Height when mounted: |
46 mm |
Vacuum Mount Height at rest: |
56 mm |
Housing Top Diameter: |
60 mm |
Housing Height Only: |
33 mm |
Housing Top Slot Width: |
7 mm |
Housing Top Slot Length: |
14 mm |
Housing Centre Thread: |
¼-20
|
Heavy Duty Trolling Unit Specifications
Rod Holder Width: |
152 mm |
Rod Holder Height: |
318 mm |
Rod Holder Internal Diameter: |
45 mm
|
Rod Holder Internal Depth: |
254 mm |
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.