Need extra rod storage space or a boat rod holder capable of taking the pressure of a fish strike? Have you been looking for a way to get a centre line into your trolling spread? Maybe you are after the strongest single boat rod holder SeaSucker makes.
Crafted from polished aluminium with a mirror finish it looks like the standard boat gear found in most high end boats.The SeaSucker Heavy-Duty Trolling Unit matches the look of your permanent boat rod holders.
It's primary purpose is both trolling and rod transportation; capable of trolling heavy game rods / reels. Attach the Heavy-Duty Trolling Unit where you need it; then if you need to move it elsewhere it can be removed in seconds! All it needs is a reasonably smooth and flat surface to attach the two integrated SeaSucker 152 mm Vacuum Mounts. There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.
Bolted to the back of the Heavy-Duty Trolling Unit are two 152 mm SeaSucker Vacuum Mounts packing 180 kg of holding power. Rod holder has a 45 mm internal diameter; has a plastic insert; is 254 mm deep and pinned at the bottom for slotted rod butts. Rod Holder Dimensions: 318 mm x 152 mm.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||90 kg|
|Load Carrying Capacity:||31.75 kg|
|Vacuum Mount Diameter:||152 mm|
|Vacuum Mount Height when mounted:||46 mm|
|Vacuum Mount Height at rest:||56 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
|Rod Holder Width:||152 mm|
|Rod Holder Height:||318 mm|
|Rod Holder Internal Diameter:||45 mm
|Rod Holder Internal Depth:||254 mm|
Conner steals the show with showing how seasuckers work.
A Florida-based designer, manufacturer, wholesaler and retaile...
How to clean your SeaSucker vacuum cup.
The 114 mm Black Vacuum Mount with Low Profile (LP) Housing The Low Profile 114 mm Vacuum Mount by SeaSucker is 8 mm shorter than our standard 114 mm Vacuum Mount. It also has two stainless steel...