What's new for the SeaSucker Komodo
The SeaSucker Komodo includes the following:
- SeaSucker Hogg Front Wheel Holder - Included with the SeaSucker Komodo is the SeaSucker Hogg, our revolutionary front wheel holder for bikes with Quick-Release Front Wheels
- Kit includes components to accommodate both 9 mm x 100 mm quick-release hubs and 12 mm x 100 mm through-axle hubs
- 2 Year Warranty - All SeaSucker Down Under sold Komodo Bike Racks come with a 2 year warranty. The standard warranty elsewhere is 12 months.
- Redesigned vacuum pumps with red indicator bands - The indicator bands are impregnated into the pump, this prevents fading of the indicator band.
- Aluminium Spray Bottle & Micro-Fibre Cloth - Only at SeaSucker Down Under. Fill with water only, clean your car and the vacuum pads & moisten them prior to use.
The SeaSucker Komodo Single Bike Rack for Sports Cars & Convertibles
Looking to transport your road bike with your car that has minimal space for installing a bike rack. Typically sports cars and convertibles have little space for a bike rack. The SeaSucker Komodo solves this problem by having a small footprint. It needs 46 cm x 33 cm of clear space on the roof or boot lid to attach.
Machined from solid aluminium and available in 3 colours (blue, green & black) the SeaSucker Komodo's tail pivots allowing it to fold up for easy storage. This bike rack is designed for road bikes or bikes with a quick release fork mount. It will not transport bikes with through axle front wheels. All four vacuum mounts articulate enabling the SeaSucker Komodo to conform to irregular or corrugated surfaces.
The SeaSucker Komodo is easy to install and won't damage your vehicle; secured using four 152 mm Vacuum Mounts packing a total of 360 kg of holding power. The SeaSucker Komodo can be installed in under one minute and is removed in seconds, no tools required. It is compact enough to fit inside the boot of your car when not in use.
The SeaSucker Komodo comes standard with the components to accommodate both 9 mm x 100 mm quick-release hubs and 12 mm x 100 mm road bike through-axle hubs. Installation or switching from one to the other takes only seconds. The SeaSucker Komodo Kit also includes the SeaSucker Hogg Front Wheel Holder
SeaSucker vacuum mounts are:
- Non-Marking.
- UV and Weather Resistant.
- Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces.
- Not suited on cars that have been Vinyl Wrapped as the Vacuum Mount will leave an indentation.
It will allow you to temporarily but securely mount your bikes without the hassle of a permanent bike rack.
The SeaSucker Komodo comes with one non-lockable quick release fork mount, once adjusted you can release and secure you bike in seconds. The SeaSucker Komodo requires some minor assembly. Tools needed are: a 5/32″ Allen/hex wrench; and a 7/16″ wrench or adjustable spanner.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Product Features & Benefits
- The easiest to install bike rack on the market - Installed in under 1 minute, removed within seconds.
- It requires 46 cm x 33 cm of space making it ideal for Sports Cars and Convertibles.
- You will save money by not having to buy another bike rack when you change cars
- Reduced your fuel consumption by not leaving your bike rack permanently installed on your car.
- Use the Komodo on your car, your partner's car and your friends car
WHAT'S IN THE BOX?
The SeaSucker Komodo Bike Rack Kit includes
- 1 x SeaSucker Komodo Single Bike Rack anodized aluminium frame
- 1 x SeaSucker Hogg Front Wheel Holder
- 4 x 152 mm SeaSucker Black Vacuum Mounts.
- 1 x SeaSucker quick release fork mount pre-installed on the Bike Rack frame.
- 4 x 152 mm SeaSucker White Vacuum Mount Protective Covers.
- Aluminium Water Spray Bottle & Micro-Fibre Cloth.
- Instruction Manual.
- 5g Lube Tube for vacuum pump maintenance.
Tools included to install the quick release fork mounts
- 9/64" Allen / Hex Key
- 7/16" Socket or Spanner
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
SeaSucker Komodo Bike Rack Specifications
Bicycle Capacity
|
1 bicycle, up to 20 kg
|
| Bike Rack Type: |
Fork Mounted (front wheel must be removed) |
| Vehcile Attachment Location: |
Roof Top, Boot Lid or Hatchback |
| Vehicle Surface: |
Steel, Aluminium, Glass, Fibreglass & Carbon Fibre |
| Vehicle Type: |
Most cars including Sports Cars & Convertibles |
| Quick Release Fork Mount Type: |
One SeaSucker quick release fork mount with 9 mm skewer |
| Vacuum Mounts on Frame: |
Four 152 mm SeaSucker Vacuum Mounts |
| Vehicle footprint length: |
(18 inches) - 460 mm
|
| Vehicle footprint width: |
(16 inches) - 406 mm
|
| Weight: |
4 kg Approx. |
We offer a 2 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 2 years of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
SeaSucker Komodo Bike Rack Specifications
Bicycle Capacity
|
1 bicycle, up to 20 kg
|
| Bike Rack Type: |
Fork Mounted (front wheel must be removed) |
| Vehcile Attachment Location: |
Roof Top, Boot Lid or Hatchback |
| Vehicle Surface: |
Steel, Aluminium, Glass, Fibreglass & Carbon Fibre |
| Vehicle Type: |
Most cars including Sports Cars & Convertibles |
| Quick Release Fork Mount Type: |
One SeaSucker quick release fork mount with 9 mm skewer |
| Vacuum Mounts on Frame: |
Four 152 mm SeaSucker Vacuum Mounts |
| Vehicle footprint length: |
(18 inches) - 460 mm
|
| Vehicle footprint width: |
(16 inches) - 406 mm
|
| Weight: |
4 kg Approx. |
Free Australia-Wide Shipping for orders over $200
