Free Australia-Wide Shipping for orders over $200
Cast from high-grade stainless steel and set to an angle of 0 degrees or vertical this boat rod holder has a 57 mm outside diameter and a rod tube length of 265 mm. The closed end features a standard 1/4 inch round pin. As a result, a hose can be attached to the pin redirecting water that has entered the rod holder. It is designed for bent butt rods with a spinning class to 63 kg (150 lb). The choice of boat manufacturers and consumers around the globe, Lee's Tackle are the Boat Rod Holder Specialist for over 50 years.
1 x Lee's Tackle RH5332V Heavy-Duty 0 DEG Flush Mount Boat Rod Holder - Closed End
| Mount Type: | Flush Mount |
| Rod Holder Angle: | 0 Degrees |
| Baseplate Length: | 127 mm (5") |
| Baseplate Width: | 101 mm (4") |
| Tube Diameter: | 57 mm (2 1/4") |
| Rod Tube Length: | 265 mm |
| Spinning Class: | 63 kg (150 lb) |
Lee’s Tackle
Lee's Tackle Stainless Steel Medium-Duty 0 Degree Flush Mount Boat Rod Holder with Closed End Cast from high-grade stainless steel and set to an angle of 0 degrees or vertical this boat rod holder
Lee’s Tackle
Lee's Tackle Stainless Steel Heavy-Duty 15 Degree Flush Mount Boat Rod Holder with Closed End Cast from high-grade stainless steel and set to an angle of 15 degrees this boat rod holder has a 57 m
Lee’s Tackle
Lee's Tackle Stainless Steel Heavy-Duty 30 Degree Flush Mount Boat Rod Holder with Closed End Cast from high-grade stainless steel and set to an angle of 30 degrees this boat rod holder has a 57 m
Lee’s Tackle
Lee's Tackle Stainless Steel Medium-Duty 15 Degree Flush Mount Boat Rod Holder with Closed End Cast from high-grade stainless steel and set to an angle of 15 degrees this boat rod holder has a 50 mm...
Lee’s Tackle
Lee's Tackle Stainless Steel Medium-Duty 30 Degree Flush Mount Boat Rod Holder with Closed End Cast from high-grade stainless steel and set to an angle of 30 degrees this boat rod holder has a 50
