The 2018 SeaSucker Komodo includes the following:
Looking to transport your road bike with your car that has minimal space for installing a bike rack. Typically sports cars and convertibles have little space for a bike rack. The SeaSucker Komodo solves this problem by having a small footprint. It needs 46 cm x 33 cm of clear space on the roof or boot lid to attach.
Machined from solid aluminium and available in 3 colours (blue, green & black) the SeaSucker Komodo's tail pivots allowing it to fold up for easy storage. This bike rack is designed for road bikes or bikes with a quick release fork mount. It will not transport bikes with through axle front wheels. All four vacuum mounts articulate enabling the SeaSucker Komodo to conform to irregular or corrugated surfaces.
The SeaSucker Komodo is easy to install and won't damage your vehicle; secured using four 152 mm Vacuum Mounts packing a total of 360 kg of holding power. The SeaSucker Komodo can be installed in under one minute and is removed in seconds, no tools required. It is compact enough to fit inside the boot of your car when not in use.
The vacuum mounts are non-marking, UV and weather resistant, and hold exceptionally well on glass, metal and fibreglass surfaces. It will allow you to temporarily but securely mount your bikes without the hassle of a permanent bike rack.
The SeaSucker Komodo comes with one non-lockable quick release fork mount, once adjusted you can release and secure you bike in seconds. The SeaSucker Komodo requires some minor assembly. Tools needed are: a 5/32″ Allen/hex wrench; and a 7/16″ wrench or adjustable spanner.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
||1 bicycle, up to 20 kg
|Bike Rack Type:||Fork Mounted (front wheel must be removed)|
|Vehcile Attachment Location:||Roof Top, Boot Lid or Hatchback|
|Vehicle Surface:||Metal, Glass or Fiberglass|
|Vehicle Type:||Most cars including Sports Cars & Convertibles|
|Quick Release Fork Mount Type:||One SeaSucker quick release fork mount with 9 mm skewer|
|Vacuum Mounts on Frame:||Four 152 mm SeaSucker Vacuum Mounts|
|Vehicle footprint length:||(18 inches) - 460 mm
|Vehicle footprint width:||(16 inches) - 406 mm
|Weight:||4 kg Approx.|
SeaSucker Komodo on the Continental Test Track at SEMA 2016. ...
The SeaSucker Komodo is the rack of all racks. The small foot ...
Learn more https://www.etrailer.com/Trunk-Bike-Racks/SeaSucker...
The 114 mm Black Vacuum Mount with Low Profile (LP) Housing The Low Profile 114 mm Vacuum Mount by SeaSucker is 8 mm shorter than our standard 114 mm Vacuum Mount. It also has two stainless steel...
SeaSucker 4-Rod Holder with two 114 mm Vacuum Mounts This is SeaSucker’s all purpose boat rod holder; its purpose is both rod transportation and light trolling. Capable of transporting...