We've paired our 2-Cup Holder with a Double Socket Arm & Balls giving you complete flexibility in positioning - from vertical to horizontal. It really doesn’t matter what surface angle you wish to mount this Boat Drinks Holder because it is highly adjustable. To adjust it release the arm thumb screw and you can quickly adjust the boat cup holder's position so your drinks remain level.
The SeaSucker 2-Cup Holder Angle Mount is a truly removable Boat Drinks Holder solution and is super quick to install and remove. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 114 mm Vacuum Mount. There is plenty of surface area compatible with our Vacuum Mounts in fibreglass and aluminium boats. A few pumps on the Vacuum Mount pump is all it takes to install this Boat Cup Holder. Lift the Vacuum Cup tab and it pops off. To protect the Vacuum Mount when not in use press the included Protective Cover over the Vacuum Cup and you're done.
The 89 mm cup inserts can accommodate most drinks with the foam insulation / stubby holder still wrapped around them. Or swap out the cup holder insert for an optional Small Dry Box (a small waterproof storage box for your wallet, Smartphone, etc.). Made from 19 mm white starboard. Comes with a 114 mm SeaSucker Vacuum Mount packing 45 kg holding power.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
WHAT'S IN THE BOX?
The SeaSucker 2-Cup Holder Angle Mount Kit includes
Please refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||45 kg|
|Load Carrying Capacity:||18.14 kg|
|Vacuum Mount Diameter:||114 mm|
|Vacuum Mount Height when mounted:||45 mm|
|Vacuum Mount Height at rest:||52 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:||¼-20|
|Cup Holder Overall Length:||305 mm|
|Cup Holder Overall Width:||137 mm|
|Cup Holder Internal Diameter:||89 mm|
|Cup Holder Max. Depth:||80 mm|
|Cup Holder Min. Depth:||57 mm|