SeaSucker
2-Cup Holder - Horizontal Mount
SeaSucker 2-Cup Holder Horizontal Mount We've fitted our 2-Cup Holder with a
Free Australia-Wide Shipping for orders over $200
SeaSucker 4 Cup Holder Horizontal Mount
The SeaSucker 4 Cup Holder harnesses the power of a 114 mm SeaSucker White Vacuum Mount to hold 4 cans or bottles in stubbie holders. The SeaSucker 4-Cup Holder Horizontal Mount is a truly removable Boat Drinks Holder solution and is super quick to install and remove. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 114 mm Vacuum Mount. There is plenty of surface area compatible with our Vacuum Mounts in fibreglass and aluminium boats. A few pumps on the Vacuum Mount pump is all it takes to install this Boat Cup Holder. Lift the Vacuum Cup tab and it pops off. To protect the Vacuum Mount when not in use press the included Protective Cover over the Vacuum Cup and you're done.
The 89 mm cup inserts can accommodate most drinks with the foam insulation / stubbie holder still wrapped around them. Or swap out the cup holder insert for an optional Small Dry Box (a small waterproof storage box for your wallet, Smartphone, etc.) Made from 19 mm white starboard it comes with a 114 mm SeaSucker packing 45 kg of holding power.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
Maximum Pull Rating: | 45 kg |
Load Carrying Capacity: | 18.14 kg |
Vacuum Mount Diameter: | 114 mm |
Vacuum Mount Height when mounted: | 45 mm |
Vacuum Mount Height at rest: | 52 mm |
Housing Top Diameter: | 60 mm |
Housing Height Only: | 33 mm |
Housing Top Slot Width: | 7 mm |
Housing Top Slot Length: | 14 mm |
Housing Centre Thread: | ¼-20 |
Cup Holder Overall Length: | 356 mm |
Cup Holder Overall Width: | 241 mm |
Cup Holder Internal Diameter: | 89 mm |
Cup Holder Max. Depth: | 80 mm |
Cup Holder Min. Depth: | 57 mm |