SeaSucker Transducer Mount Product Photo


Suction Cup Transducer Mount

IN STOCK - Same business day shipping if order is placed before 3pm

SeaSucker Heavy-Duty Suction Cup Transducer Mount

Got a new fish finder and you don't want to permanently mount the transducer? Then the SeaSucker transducer mount is just the thing for you! It's a Heavy-Duty Transducer Suction Cup Mount that can be installed and removed in seconds. This Suction Cup Transducer Mount does not require drilling holes as its 2 powerful vacuum mounts will keep it secure. Use the SeaSucker Transducer Mount to Mount your favorite Fish Finder Transducer using this Heavy Duty Suction Cup Transducer Mount. 

Two 114 mm SeaSucker vacuum mounts are pre-attached to an anodised aluminium bar so you can mount it on your transom when needed and take it off easily when you’re putting the boat away. That's a combined direct pull rating of 90 kg. You will have to drill holes in the aluminium bar to match the screw pattern on your transducer. With this elegant Suction Cup Transducer Mount you can easily install your fishfinger in almost any goat.


Like our motto says NO DRILLS!  NO SCREWS!!  NO PROBLEMS!!! 1

Product Features & Benefits

  • You will save on the cost of having to fill in holes in your transom, this can get very expensive!
  • Easily adjust the position of your transducer to suit the conditions
  • The cost of maintaining our vacuum mounts is very low; every part is replaceable and the pump is fully serviceable.
  • The one solution for many surfaces including steel, aluminium, glass, fibreglass, painted plaster and some non-skid surfaces.
  • If you change your mind you can relocate the Transducer Mount in seconds and leave no marks behind.  


  • 1 x 405 mm Aluminium Track
  • 2 x 114 mm SeaSucker White Vacuum Mounts
  • 2 x 114 mm SeaSucker White Protective Covers
  • SeaSucker Vacuum Mount User Guide 
  • This kit arrives pre-assembled  



Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions. 

114 mm Vacuum Mount Specifications
Maximum Pull Rating:  45 kg
Load Carrying Capacity: 18.14 kg
Vacuum Mount Diameter: 114 mm
Vacuum Mount Height when mounted: 45 mm
Vacuum Mount Height at rest: 52 mm
Housing Top Diameter:  60 mm
Housing Height Only: 33 mm
Housing Top Slot Width: 7 mm
Housing Top Slot Length: 14 mm
Housing Centre Thread:  ¼-20


We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.