This is SeaSucker’s beefed up 2-Rod Holder; its purpose is rod transportation. Capable of transporting light to medium rod / reel with ease; just mount it on a reasonably smooth and flat surface. Attach the boat rod holder where you need it; then if you need to move it elsewhere it can be removed in seconds!
The SeaSucker Pro Series 2-Rod Holder features a HDPE custom built frame. The frame includes holes for the two PVC Rod Holders. Furthermore, the frame has holes to store the fishing rod butt pins when not in use. The new HDPE frame is very sturdy ensuring your fishing rods are stored and transported safely.
There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.
Two white PVC rod holders insert into the HDPE frame. The frame is bolted to a 152 mm Vacuum Mount packing 90 kg of holding power.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||90 kg|
|Load Carrying Capacity:||31.75 kg|
|Vacuum Mount Diameter:||152 mm|
|Vacuum Mount Height when mounted:||46 mm|
|Vacuum Mount Height at rest:||56 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
|Rod Holder Internal Diameter:||44 mm|
|Rod Holder Internal Depth:||304 mm|
|HPDE Frame Length:||305 mm
Conner steals the show with showing how seasuckers work.
SeaSucker recommends occasional cleaning and maintenance to ke...
http://www.seasucker.com SeaSuckers are powerful vacuum-cup mo...