SeaSucker Pro Series - Single Rod Holder

SeaSucker

Pro Series - Single Rod Holder

SKU:
5081
Condition:
New
Availability:
19th Agust 2019 - Enter your email below and press NOTIFY ME to be notified when product is back in stock

Expected release date is 30th Aug 2019

SeaSucker Pro Series - Single Rod Holder with one 114 mm Vacuum Mount

This is SeaSucker’s basic boat rod holder; its primary purpose is rod transportation. Capable of transporting a light to medium rod / reel with ease; just mount it on a reasonably smooth and flat surface. Attach the boat rod holder where you need it; then if you need to move it elsewhere it can be removed in seconds!

The Pro Series Rod Holders feature a HDPE frame along with plastic rod holders with removable fishing rod butt pins. This makes for a sturdy rod holder capable of transporting your favourite fishing rod without drilling holes.

There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.

One white PVC rod holder slides onto a HDPE frame. The frame is bolted to a 114 mm Vacuum Mount packing 45 kg of holding power.

Like our motto says NO DRILLS!  NO SCREWS!!  NO PROBLEMS!!! 

Product Features & Benefits

  • You will save on the cost of having to fill in holes ever time, this can get very expensive!
  • You will save money by not having to buy the same equipment for your next boat.
  • The cost of maintaining our vacuum mounts is very low; every part is replaceable and the pump is serviceable.
  • The one solution for many surfaces including steel, aluminium, glass, fibreglass and some non-skid surfaces.
  • If you change your mind you can relocate the boat rod holder in seconds and leave no marks behind.
  • It's the only boat rod holder on the market that can be used in almost any boat.
  • If you are going out in your friends boat and he is short on rod storage just take this boat rod holder with you. 

 

WHAT'S IN THE BOX? 
  • SeaSucker Pro Series - Single Rod Holder includes
    • 1 x HDPE Frame
    • 1 x PVC Rod Holder
    • 1 x 114 mm SeaSucker White Vacuum Mount
    • 1 x 114 mm SeaSucker White Protective Cover
    • Stainless Steel Hardware
    • SeaSucker Vacuum Mount User Guide 
    • Some basic assembly; no tools required   

 

Specifications

Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.

114 mm Vacuum Mount Specifications
Maximum Pull Rating:  45 kg
Load Carrying Capacity: 18.14 kg
Vacuum Mount Diameter: 114 mm
Vacuum Mount Height when mounted: 45 mm
Vacuum Mount Height at rest: 52 mm
Housing Top Diameter:  60 mm
Housing Height Only: 33 mm
Housing Top Slot Width: 7 mm
Housing Top Slot Length: 14 mm
Housing Centre Thread:  ¼-20
Single Rod Holder Specifications
Rod Holder Internal Diameter:  TBA
Rod Holder Internal Depth: TBA
HPDE Frame Length: TBA

 

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages. A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.

Customers Also Viewed

SeaSucker 12 mm x 100 mm Adapter will allow 12 mm through axle bikes to use the SeaSucker Flight Deck, 3-Wheel Holder or Add-on Front Wheel Holder

SeaSucker

12 mm Front Wheel Adapter

SeaSucker 12 mm Adapter for Flight Decks, 3-Wheel Holders & Add-on Front Wheel Holders The SeaSucker Adapter is compatible with the 12 mm x 100 mm Through-Axle front hubs. Just use the 12 mm x...

SeaSucker Talon Carry Bag

SeaSucker

Talon Carry Bag

SeaSucker Talon Carry Bag The SeaSucker Talon 1-Bike Rack is our most portable fork-mounted bike rack. What has been missing is carry bag that enables you to transport the bike rack with ease...

SeaSucker

Hogg - Front Wheel Holder

SeaSucker Hogg - Revolutionary Front Wheel Holder from SeaSucker  The SeaSucker Hogg is purpose built for bikes with quick release front wheels. It is not suited to bikes with through-axles. It...

SeaSucker 3-Wheel Holder

SeaSucker

3-Wheel Holder

SeaSucker 3-Wheel Holder  The SeaSucker 3-Wheel Holder can be used with the SeaSucker Mini Bomber and Bomber. It's a great alternative to the SeaSucker Flight Deck; it works independently of...

SeaSucker 2-Cup Holder Angle Mount; the highly adjustable removable boat drink holder solution

SeaSucker

2-Cup Holder - Angle Mount

SeaSucker 2-Cup Holder Angle Mount We've paired our 2-Cup Holder with a RAM Mount giving you complete flexibility in positioning - from vertical to horizontal. It really doesn’t matter...

Total:
$0.00