SeaSucker 6-Rod Holder with two 152 mm SeaSucker Vacuum Mounts Need extra rod storage to store your big game gear. This boat rod holder is similar to SeaSucker’s flagship mdel, just a...
Need extra rod storage space or a boat rod holder capable of taking the pressure of a fish strike? Crafted from polished aluminium with a mirror finish it looks like the standard boat gear found in most high end boats. It's primary purpose is both trolling and rod transportation; capable of trolling your medium to heavy game rods / reels.
Bolted to the back is one 152 mm SeaSucker Vacuum Mount packing 90 kg of holding power. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 152 mm Vacuum Mount. There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.
Supporting the 152 mm SeaSucker Vacuum Mount are two integrated support legs with rubber caps. This gives this aluminium boat rod holder additional torque resistance and stability.
The rod holders are fitted with moulded PVC inserts and have a welded stainless steel pin at the bottom for slotted rod butts. Attach the boat rod holder where you need it; then if you need to move it elsewhere it can be removed in seconds!
Rod holder has a 45 mm internal diameter; has a plastic insert; is 254 mm deep and pinned at the bottom for slotted rod butts. Rod Holder Dimensions: 316 mm x 152 mm.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||90 kg|
|Load Carrying Capacity:||31.75 kg|
|Vacuum Mount Diameter:||152 mm|
|Vacuum Mount Height when mounted:||46 mm|
|Vacuum Mount Height at rest:||56 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
|Rod Holder Internal Diameter:||44 mm|
|Rod Holder Internal Depth:||304 mm|
|Aluminium Track Length:||406 mm
SeaSucker recommends occasional cleaning and maintenance to ke...
Conner steals the show with showing how seasuckers work.
Vacuum mounted bike racks, board racks, ipad and phone mounts,...
The 114 mm Black Vacuum Mount with Low Profile (LP) Housing The Low Profile 114 mm Vacuum Mount by SeaSucker is 8 mm shorter than our standard 114 mm Vacuum Mount. It also has two stainless steel...