Need a specialist Fly Rod Holder you can take with you and mount to any reasonably smooth surface. No squeezing square pegs into round holes; or in this case getting a fly rod outfit to work in a conventional rod holder. It's the well-designed "Del Stang" fly rod holder by Blue Water Designs. It's securely attached to a 114 mm Vacuum Mount; packing 45 kg of holding power.
The SeaSucker Fly Rod Holder is a truly removable boat rod holder solution and is super quick to install and remove. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 114 mm Vacuum Mount. There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.
A Velcro strap at the top of the rod holder keeps your rod in place when on the move. Will also handle smaller spinning rods. This is the unit SeaSucker recommends when you’re bringing some light tackle along on your Jet Ski or Wave Runner. Rod Holder Dimensions: 247 mm x 46 mm.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
|Maximum Pull Rating:||45 kg|
|Load Carrying Capacity:||18.14 kg|
|Vacuum Mount Diameter:||114 mm|
|Vacuum Mount Height when mounted:||45 mm|
|Vacuum Mount Height at rest:||52 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:|| ¼-20
|Rod Holder Width:||46 mm|
|Rod Holder Length:||247 mm|
|Rod Holder Internal Diameter (excluding foam insert):||43 mm
A Florida-based designer, manufacturer, wholesaler and retaile...
How to clean your SeaSucker vacuum cup.
Conner steals the show with showing how seasuckers work.
The 114 mm Black Vacuum Mount with Low Profile (LP) Housing The Low Profile 114 mm Vacuum Mount by SeaSucker is 8 mm shorter than our standard 114 mm Vacuum Mount. It also has two stainless steel...