SeaSucker Fly Rod Holder
Need a specialist Fly Rod Holder you can take with you and mount to any reasonably smooth surface. No squeezing square pegs into round holes; or in this case getting a fly rod outfit to work in a conventional rod holder. It's the well-designed "Del Stang" fly rod holder by Blue Water Designs. It's securely attached to a 114 mm Vacuum Mount; packing 45 kg of holding power.
The SeaSucker Fly Rod Holder is a truly removable boat rod holder solution and is super quick to install and remove. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 114 mm Vacuum Mount. There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.
A Velcro strap at the top of the rod holder keeps your rod in place when on the move. Will also handle smaller spinning rods. This is the unit SeaSucker recommends when you’re bringing some light tackle along on your Jet Ski or Wave Runner. Rod Holder Dimensions: 247 mm x 46 mm.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Product Features & Benefits
- You will save on the cost of having to fill in holes ever time, this can get very expensive!
- You will save money by not having to buy the same equipment for your next boat.
- The cost of maintaining our vacuum mounts is very low; every part is replaceable and the pump is serviceable.
- The one solution for many surfaces including steel, aluminium, glass, fibreglass and some non-skid surfaces.
- If you change your mind you can relocate the boat rod holder in seconds and leave no marks behind.
- It's the only boat rod holder on the market that can be used in almost any boat.
- If you are going out in your friends boat and he is short on rod storage just take this boat rod holder with you.
WHAT'S IN THE BOX?
- SeaSucker Fly Rod Holder with one 114 mm Vacuum Mount Kit includes
- 1 x "Del Stang" Fly Rod Holder by Blue Water Designs.
- 1 x 114 mm SeaSucker White Vacuum Mount
- 1 x 114 mm SeaSucker White Protective Cover
- Stainless Steel Hardware
- SeaSucker Vacuum Mount User Guide
- Some minor assembly required; tools needed are
- Phillips Head Screwdriver
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
114 mm Vacuum Mount Specifications
| Maximum Pull Rating: |
45 kg |
| Load Carrying Capacity: |
18.14 kg |
| Vacuum Mount Diameter: |
114 mm |
| Vacuum Mount Height when mounted: |
45 mm |
| Vacuum Mount Height at rest: |
52 mm |
| Housing Top Diameter: |
60 mm |
| Housing Height Only: |
33 mm |
| Housing Top Slot Width: |
7 mm |
| Housing Top Slot Length: |
14 mm |
| Housing Centre Thread: |
¼-20
|
Fly Rod Holder Specifications
| Rod Holder Width: |
46 mm |
| Rod Holder Length: |
247 mm |
| Rod Holder Internal Diameter (excluding foam insert): |
43 mm
|
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
114 mm Vacuum Mount Specifications
| Maximum Pull Rating: |
45 kg |
| Load Carrying Capacity: |
18.14 kg |
| Vacuum Mount Diameter: |
114 mm |
| Vacuum Mount Height when mounted: |
45 mm |
| Vacuum Mount Height at rest: |
52 mm |
| Housing Top Diameter: |
60 mm |
| Housing Height Only: |
33 mm |
| Housing Top Slot Width: |
7 mm |
| Housing Top Slot Length: |
14 mm |
| Housing Centre Thread: |
¼-20
|
Fly Rod Holder Specifications
| Rod Holder Width: |
46 mm |
| Rod Holder Length: |
247 mm |
| Rod Holder Internal Diameter (excluding foam insert): |
43 mm
|
Free Australia-Wide Shipping for orders over $200
