SeaSucker Pro Series - Single Rod Holder with one 114 mm Vacuum Mount
Looking for a removable Rod Holder for transporting or storing your fishing rods? The SeaSucker Pro Series Single Rod Holder is the answer. It can easily transport light to medium rod/reel; mount it on a reasonably smooth and flat surface. Attach the boat rod holder where you need it; if you need to move it elsewhere, it can be removed in seconds!
Please Note: The SeaSucker Pro Series Single Rod Holder is unsuitable for trolling or fishing. If you are looking for a removable rod holder that can withstand fish strikes when trolling or fishing, please check out the SeaSucker Heavy-Duty Rod Holder.
The Pro Series Rod Holders feature a HDPE frame along with plastic rod holders with removable fishing rod butt pins. This makes for a sturdy rod holder capable of transporting your favourite fishing rod without drilling holes.
There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.
One white PVC rod holder slides onto a HDPE frame. The frame is bolted to a 114 mm Vacuum Mount packing 45 kg of holding power.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Product Features & Benefits
- You will save on the cost of having to fill in holes ever time, this can get very expensive!
- You will save money by not having to buy the same equipment for your next boat.
- The cost of maintaining our vacuum mounts is very low; every part is replaceable and the pump is serviceable.
- The one solution for many surfaces including steel, aluminium, glass, fibreglass and some non-skid surfaces.
- If you change your mind you can relocate the boat rod holder in seconds and leave no marks behind.
- It's the only boat rod holder on the market that can be used in almost any boat.
- If you are going out in your friends boat and he is short on rod storage just take this boat rod holder with you.
WHAT'S IN THE BOX?
- SeaSucker Pro Series - Single Rod Holder includes
- 1 x HDPE Frame
- 1 x PVC Rod Holder
- 1 x 114 mm SeaSucker White Vacuum Mount
- 1 x 114 mm SeaSucker White Protective Cover
- Stainless Steel Hardware
- SeaSucker Vacuum Mount User Guide
- Some basic assembly; no tools required
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
114 mm Vacuum Mount Specifications
| Maximum Pull Rating: |
45 kg |
| Load Carrying Capacity: |
18.14 kg |
| Vacuum Mount Diameter: |
114 mm |
| Vacuum Mount Height when mounted: |
45 mm |
| Vacuum Mount Height at rest: |
52 mm |
| Housing Top Diameter: |
60 mm |
| Housing Height Only: |
33 mm |
| Housing Top Slot Width: |
7 mm |
| Housing Top Slot Length: |
14 mm |
| Housing Centre Thread: |
¼-20
|
Single Rod Holder Specifications
| Rod Holder Internal Diameter: |
TBA |
| Rod Holder Internal Depth: |
TBA |
| HPDE Frame Length: |
TBA
|
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to SeaSucker Down Under for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of SeaSucker Down Under Pty Ltd to the extent permitted by law. In no event shall SeaSucker Down Under Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Specifications
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
114 mm Vacuum Mount Specifications
| Maximum Pull Rating: |
45 kg |
| Load Carrying Capacity: |
18.14 kg |
| Vacuum Mount Diameter: |
114 mm |
| Vacuum Mount Height when mounted: |
45 mm |
| Vacuum Mount Height at rest: |
52 mm |
| Housing Top Diameter: |
60 mm |
| Housing Height Only: |
33 mm |
| Housing Top Slot Width: |
7 mm |
| Housing Top Slot Length: |
14 mm |
| Housing Centre Thread: |
¼-20
|
Single Rod Holder Specifications
| Rod Holder Internal Diameter: |
TBA |
| Rod Holder Internal Depth: |
TBA |
| HPDE Frame Length: |
TBA
|
Free Australia-Wide Shipping for orders over $200
