SeaSucker
Pro Series Rod & Tool Holder Vertical Mount
SeaSucker Pro Series Rod & Tool Holder with 3 x 114 mm Vacuum Mounts
Free Australia-Wide Shipping for orders over $200
This is SeaSucker’s basic boat rod holder; its primary purpose is rod transportation. Capable of transporting a light to medium rod / reel with ease; just mount it on a reasonably smooth and flat surface. Attach the boat rod holder where you need it; then if you need to move it elsewhere it can be removed in seconds!
The Pro Series Rod Holders feature a HDPE frame along with plastic rod holders with removable fishing rod butt pins. This makes for a sturdy rod holder capable of transporting your favourite fishing rod without drilling holes.
There is plenty of surface area compatible with our vacuum mounts in fibreglass and aluminium boats. A few pumps on the vacuum mount pump is all it takes to install this boat rod holder. Lift the vacuum cup tab and it pops off. To protect the vacuum mount when not in use press the included protective cover over the vacuum cup and you're done.
One white PVC rod holder slides onto a HDPE frame. The frame is bolted to a 114 mm Vacuum Mount packing 45 kg of holding power.
Like our motto says NO DRILLS! NO SCREWS!! NO PROBLEMS!!!
Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.
Maximum Pull Rating: | 45 kg |
Load Carrying Capacity: | 18.14 kg |
Vacuum Mount Diameter: | 114 mm |
Vacuum Mount Height when mounted: | 45 mm |
Vacuum Mount Height at rest: | 52 mm |
Housing Top Diameter: | 60 mm |
Housing Height Only: | 33 mm |
Housing Top Slot Width: | 7 mm |
Housing Top Slot Length: | 14 mm |
Housing Centre Thread: | ¼-20 |
Rod Holder Internal Diameter: | TBA |
Rod Holder Internal Depth: | TBA |
HPDE Frame Length: | TBA |
Conner steals the show with showing how seasuckers work.
SeaSucker recommends occasional cleaning and maintenance to ke...
http://www.seasucker.com SeaSuckers are powerful vacuum-cup mo...